Fieldbus Power Hub, Motherboard for Gateway and Power Supply Modules MBHC-FB-4.GT*

Краткое описание: технические характеристики  MBHC-FB-4.GT*

General specifications
Design / Mounting		Motherboard based
Supply
Connection		redundant
Rated voltage		19.2 ... 35 V SELV/PELV
Rated current		12 A
Power dissipation		typ. 0.4 W per segment
Fieldbus interface
Number of segments		4 simplex
Terminating resistor		100 Ω integrated
Indicators/operating means
Fault signal		VFC alarm 1 A, 50 V DC, normally closed
Rotary switch		bus addressing, gateway-specific
Galvanic isolation
Fieldbus segment/Fieldbus segment		functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff
Fieldbus segment/Supply		functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		10 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Pollution degree		max. 2, according to IEC 60664
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		plug-in terminals , spring terminal and screw terminal
Core cross-section		2.5 mm2
Housing material		Polycarbonate
Degree of protection		IP20
Mass		approx. 540 g
Mounting		DIN mounting rail
Data for application in connection with hazardous areas
Certificate		TÜV 15 ATEX 7735 X
	Marking	II 3G Ex ec IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012
International approvals
IECEx approval		IECEx TUR 16.0007X
	Approved for	Ex ec IIC T4 Gc
Certificates and approvals
Marine approval		pending

Documents: MBHC-FB-4.GT*

Approvals+Certificates: MBHC-FB-4.GT*

Сопутствующие продукты: MBHC-FB-4.GT*

Matching system components
HCD2-FBPS-1.500 Fieldbus Power Hub, Compact Power Supply Module Output: 28 ... 30 V/500 mA, High-power trunk for high device count and long cable lengths, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
HCD2-FBPS-1.23.500 Fieldbus Power Hub, Compact Power Supply Module Output: 21 ... 23 V/500 mA, Voltage limitation for Entity ic and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
Matching system components
HD2-GTR-4PA PROFIBUS Power Hub, Gateway Module PROFIBUS DP V1 / For 4 segments PA, Couples PROFIBUS PA devices transparently to PROFIBUS DP, Optional redundant configuration, Installation in Zone 2/Class I, Div. 2, Up to 12 Mbit/s, auto adaptingpa
HD2-DM-A Fieldbus Power Hub, Advanced Diagnostic Module Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
HD2-DM-B Fieldbus Power Hub, Basic Diagnostic Module Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
HD2-GTR-4PA.PN PROFINET Power Hub, Gateway Module Gateway PROFINET RT to 4 x PROFIBUS PA segments, Up to 32 devices per PROFIBUS PA segment, Installation in Zone 2/Class I, Div. 2, Ring and system redundancy, Integrated webserver for diagnosticspa
MBHC-FB-4R.HSC* Compact Fieldbus Power Hub, Motherboard, Host System Connector 4 segments, redundant, individual modules per segment, Customizable cable connections to any PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus and PROFIBUS PApa
Accessories
TPH-LBF-IA1.36.DE* Fieldbus Surge Protector, Trunk Installation on Power Hub Pluggable, mounts between Power Hub and trunk cable, Intrinsically safe (Ex ia), FISCO, Entity, DART Fieldbus, or general-purpose, Optional diagnostics for wear, Grounding of shield direct, For FOUNDATION Fieldbus H1 and PROFIBUS PApa

Function: MBHC-FB-4.GT*

The motherboard is a system component of the FieldConnex ^®Power Hub, a modular fieldbus power supply for 4 segments. It is the wiring interface for one gateway, one advanced diagnostic module, and 4 power supply modules. The power supply supports explosion protection, e. g., the high‑power trunk for long cable lengths and high device counts. The Power Hub supports advanced diagnostics for fast fieldbus commissioning and online monitoring.

Sockets for all modules enable simple installation and replacement without tools. Wire connections can be selected as spring terminals or screw terminals.

The motherboard supports a choice of gateways for different host protocols. A PROFIBUS PA master for each segment enables short bus cycle times. The DCS can access the advanced diagnostic module directly via the gateway without additional wiring or configuration.

This design allows the most compact cabinet layout. Excellent availability and a long service life are achieved through the following features: A passive impedance filter per segment without active electronic components, a high‑availability fieldbus termination, and plugs with retaining screws.