Служба поддержки клиентов подразделения "Промышленные датчики"
Serviceline Explosion Protection
Недоступен для заказа
Недоступен для заказа

Remote Monitor VisuNet EX2 GMP RM3719

VisuNet EX2 GMP RM3719
  • Thin Client solution (with VisuNet RM Shell firmware)
  • 19 inch monitor (48.3 cm)
  • Certified for ATEX and IECEx Zone 2/22
  • Stainless steel housing with a surface finish of ≤ 0.8 µm
  • Easy-to-clean design that complies with GMP guidelines
  • IP66 rating of the entire system

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Загрузить подробное описание::

Краткое описание: технические характеристики  VisuNet EX2 GMP RM3719

Описание оборудования
19 inch (48.3 cm) remote monitor
General specifications
TypeRemote Monitor
ProcessorThin Client - 1.46 GHz Intel® Atom E3826
alternative: 1.58GHz Intel® Celeron N2807 *
Mass storagecompact flash: 32 GB CFAST
Rated voltage24 V DC
Input voltage range20 ... 30 V DC (SELV)
Power consumptionmax. 60 W
Indicators/operating means
TypeLiquid Crystal Display (LCD) with LED backlight
Screen diagonal48.3 cm (19 inch)
Resolution1280 x 1024 Pixel
Color depth24-bit color depth (16.7 million colors)
Brightness300 cd/m2 (nit)
Life spanback lamp life: 50.000 hrs typical half life , at 25 °C (77 °F)
Input devicesoptional: projective capacitive, 10 finger multi-touch, glove-friendly
optional: analog-resistive
Foil keyboard with different pointing device options available (see EXTA3 datasheet)
Interface type1 x Ethernet (Ex ec) , 3 x USB (Ex ic) , 1 x RS 232 (Ex ec) , 1 x USB (Ex ec)
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2:2005
EN IEC 61000-6-4:2019
Operating systemVisuNet RM Shell 5 (based on Microsoft® Windows® 10 IoT LTSB)
Ambient conditions
Ambient temperature0 ... 50 °C (32 ... 122 °F)

Storage temperature-10 ... 60 °C (14 ... 140 °F)
Relative humiditymax. 85 % non-condensing
Mechanical specifications
Degree of protectionIP66
SurfaceSystem housing: stainless steel 1.4301 / AISI 304 except rear panel
Rear panel: aluminum 6061 T6 anodized with nickel acetate
EXTA3--F--U02-C-10-N hinges: zinc die-cast nickel-plated (Cu-Ni layer system)
Surface qualityRa ≤ 0.8 µm
Mounting typeslim line housing
several mounting options (pedestal turnable)
Massapprox. 13 kg
Dimensions568 mm x 450 mm x 73 mm
Data for application in connection with hazardous areas
CertificatePF 16 CERT B0F0AX
MarkingEx-Hexagon II 3G Ex ic ec [ic] IIC T4 Gc (capacitive touchscreen)
Ex-Hexagon II 3G Ex ic ec nC [ic] IIC T4 Gc (resistive touchscreen)
Ex-Hexagon II 3D Ex ic tc [ic] IIC T85°C Dc
Directive conformity
Directive 2014/34/EUEN IEC 60079-0:2018
EN 60079-7:2015
EN 60079-11:2012
EN 60079-15:2010
EN 60079-31:2009
Power supply
ConnectionX1: 1 ... 4
Rated voltage24 V DC
Rated current< 2.5 A
Maximum safe voltage Um60 V
Interface type 1Ethernet (Ex ec)
ConnectionX2: 1 ... 8
Rated voltage30 V
Rated current400 mA
Maximum safe voltage Um60 V
Interface type 2Serial interface RS 232 (Ex ec)
ConnectionX3: 1 ... 4
Rated voltage±15 V
Rated current200 mA
Maximum safe voltage Um60 V
Interface type 3USB (Ex ec)
ConnectionX3: 5 ... 8
Rated voltage5 V
Rated current< 500 mA
Maximum safe voltage Um60 V
Interface type 4USB (Ex ic)
ConnectionX4: 1 ... 4
X4: 5 ... 8
Voltage Uo4.95 V
Current Io234 mA
Power Po570 mW
Characteristic curvetrapezoid
Internal resistor41.6 Ω
Lumped capacitances OR inductancesCo = 100 µF
Lo = 1 mH
Interface type 5USB (Ex ic)
ConnectionX5: 1 ... 4
Voltage Uo4.95 V
Current Io472 mA
Power Po1582 mW
Characteristic curvetrapezoid
Internal resistor33.2 Ω
Lumped capacitances AND inductancesCo = 14 µF Lo = 5 µH
Lumped capacitances OR inductancesCo = 100 µF Lo = 0.3 mH
General information
Supplementary information* see Typelabel
2021 alternative, processor can not be choosen


ECLASS 11.019200201
ECLASS 10.0.119200201
ECLASS 9.019200201
ECLASS 8.019200201
ECLASS 5.127242402
ETIM 8.0EC001428
ETIM 7.0EC001428
ETIM 6.0EC001428
ETIM 5.0EC001428
UNSPSC 12.139121106

Documents: VisuNet EX2 GMP RM3719

ManualsЯзыкТип файлаРазмер файла
Technical Manual VisuNet EX2 GMP PC/RMENGPDF4079 KB
Instruction leaflets
Instruction leaflet / BeipackzettelALLPDF328 KB
Instruction manuals
ИнструкцииBULPDF226 KB
Návod k poużitíCZEPDF218 KB
Instruktions manualDANPDF217 KB
Instruction manualENGPDF223 KB
KasutusjuhendESTPDF212 KB
KäyttöohjeFINPDF211 KB
Manuel d'instructionsFRAPDF222 KB
BetriebsanleitungGERPDF224 KB
Οδηγίες χρήσηςGREPDF230 KB
HandleidingHOLPDF220 KB
Instruction manual / BetriebsanleitungHRVPDF216 KB
Használati útmutatóHUNPDF219 KB
Manuale di istruzioniITAPDF219 KB
Lietošanas pamācībaLAVPDF216 KB
Instrukciju vadovasLITPDF218 KB
Instrukcja obsługiPOLPDF220 KB
Manual de instruçõesPORPDF221 KB
Manual de utilizareRONPDF219 KB
ИнструкцииRUSPDF226 KB
Návod na poużitieSLKPDF219 KB
Navodila za uporaboSLVPDF216 KB
Manual de instruccionesSPAPDF221 KB
ManualSWEPDF214 KB
Technical information
HMI & Virtualization in Process Automation: An Introduction to VirtualizationENGPDF8831 KB

Approvals+Certificates: VisuNet EX2 GMP RM3719

CertificatesСертификат №Тип файлаРазмер файла
ATEX CertificatePF16CERTB0F0XPDF213 KB

Сопутствующие продукты: VisuNet EX2 GMP RM3719

Thin Client Firmware for VisuNet Remote Monitors and Box Thin Clients, Innovative firmware to support easy integration and management of remote monitors and thin clients, Supports installation of third-party applications, such as Citrix Receiver and Java Runtime, Based on Microsoft® Windows 10 IoT Enterprise LTSB 2016, Microsoft Universal Write Filter, firewall, USB lock-down, and virus scanner support for maximum system security, Auto connect to host systems after RM startuppa
Additional Management tool for VisuNet Remote Monitors and Box Thin Clients, User-friendly, centralized management tool, Remotely configure (e.g., IP address) Remote Monitors, Create and edit remote profiles (e.g. a RDP connection profile) on a Remote Monitor, Copy profiles from one Remote Monitor to another Remote Monitor, Monitor the operators screen and support them remotely via "session shadowing"pa
VisuNet Control Center License Key for RM Shell 5, Enables easy, centralized management of a Remote Monitor via the VisuNet Control Centerpa
DRDC License Key for RM Shell 5, Allows you to directly connect from a VisuNet Remote Monitor to a virtualized Emerson DeltaV systempa
PRO License Key for RM Shell 5, Restricted Web browser (Internet Explorer-based): Allows the secure direct access of HTML-based MES and SCADA systems, Restricted Web browser (Chrome-Engine-based): HTML5 compatible web browser that enables the secure access of websites and web-applications., Desktop Sharing: Clone a Remote Monitor to work with one host system from several Remote Monitors simultaneously, Raritan KVM Profile: Client allows to directly connect to Raritan Dominion KX II-101 V2 KVM-Switchpa
Zone 2 / Division 2 keyboard without mousepa
Zone 2 keyboard with mechanical trackball mouse, IP66 (front plate), PC-compatible-keyboard with 105 short stroke keys, USB interface, Panel mount or stainless steel housed keyboard, International keyboard layouts, Zone 2 barrier requiredpa
Zone 2 / Division 2 keyboard with capacitive touchpad mousepa
Zone 2/ Division 2 keyboard with joystick mousepa
Zone 2 / Division 2 keyboard with optical trackball mousepa
Zone 2 / Division 2 keyboard with resistive touchpad mousepa

Function: VisuNet EX2 GMP RM3719

Visunet EX2 GMP devices are operator workstations for use in GMP conditions and come with a manufacturer's declaration of conformity to this effect. Typical application locations are the pharmaceutical and food industries as well as the production of cosmetics, flavour and nutrition.

The operator workstations are available as Remote Monitors and as Panel PCs.

The Remote Monitors are suitable for use in distributed control systems or can be connected to several Host PCs.

Remote Monitors can be operated as multimonitor systems (several RMs at one Host PC or several Host PCs at one RM) as well as in the form of Extended Desktops. Data is being transmitted Host PC either via RDP, or VNC.

The network capabilities of the Remote Monitors ensure failure-free and pure digital data transmission. The operator workstations are administered via their IP addresses, so that topology changes can be made without hassle. No additional software installation is required.

Служба обновления

Пользователи программного обеспечения для тонких клиентов Pepperl+Fuchs могут воспользоваться преимуществами нашей новой службы.


Мы будем информировать вас обо всех обновлениях программного обеспечения!