Triangulation sensor with background suppression, 250 mm adjustable detection range, blue light, light/dark on, NPN output, fixed cable, Miniature design, Easy to use, Full metal thread mounting, Highly visible LEDs for Power ON and switching state, Not sensitive to ambient lightfa
Triangulation sensor with background suppression, 250 mm adjustable detection range, blue light, light/dark on, pnp output, M8 plug 4-pin, Miniature design, Easy to use, Full metal thread mounting, Highly visible LEDs for Power ON and switching state, Not sensitive to ambient lightfa
Triangulation sensor with background suppression, 250 mm adjustable detection range, blue light, light/dark on, pnp output, fixed cable, Miniature design, Easy to use, Full metal thread mounting, Highly visible LEDs for Power ON and switching state, Not sensitive to ambient lightfa
Triangulation sensor with background suppression, 250 mm adjustable detection range, blue light, light/dark on, npn output, M8 plug 4-pin, Miniature design, Easy to use, Full metal thread mounting, Not sensitive to ambient light, Very bright, highly visible blue light spotfa
See Overview: The SC-System signal conditioners are especially designed for general-purpose applications and ensure an absolute reliable process communication ... to Power Bus Minimal space requirements due to 6 mm module width and 97 mm height Extended temperature range from -25° C to 70° C Maximum protection of people and equipment by high-quality galvanic isolation with 300 V operating- / 3 kV test voltage ...
See Overview: Our H-System signal converters receive signals from a hazardous area instrument ie, temperature sensors, potentiometers or load cells and then convert and condition them into signals such as 0/420mA or 0/210V ... See Overview: Our H-System signal converters receive signals from a hazardous area instrument i.e., temperature sensors, potentiometers or load cells and then convert and condition them into signals s ...
See Overview: The Mux2700 HART® Multiplexer from Pepperl+Fuchs provides 32 signal channels for connection to “smart” transmitters or control devices supporting digital communication according to the H ... The HIS devices follow the form factor of the termination board-mounted H-System intrinsic safety barriers . This system is ideal for applications requiring tight DCS or system integration. ...
See Overview: Designed to compliment H-system termination boards, H-system accessories from Pepperl+Fuchs provide a full range of diagnostic and alarm monitoring capabilities ... Designed to compliment the H-System and its architecture, H-System accessories provide a full range of diagnostic and alarm monitoring capabilities. The HART or fault monitoring boards can easily be added, along with tagging strips and custom length ...
See Overview: H-System repeaters from Pepperl+Fuchs transfer and isolate signals from hazardous areas to safe areas ... See Overview: H-System repeaters from Pepperl+Fuchs transfer and isolate signals from hazardous areas to safe areas. ...
See Overview: Pepperl+Fuchs offers a wide range of accessories for our WCS absolute linear encoder system ... See Overview: Pepperl+Fuchs offers a wide range of accessories for our WCS absolute linear encoder system. ...
See Overview: HART Interface Solution H-System termination boards for integration of the Mux2700 in several DCS are available from Pepperl+Fuchs ... The HART Communication Board is used with the H-System HART Multiplexer HID MUX2700. With the redundant power supply and RS485 terminals you get maximum availability for your application. Other termination boards for integration of the Mux2700 ...
See Overview: Each H-System HART Multiplexer (HID MUX 2700) from Pepperl+Fuchs provides communication to 32 HART devices This allows up to 992 field devices to be addressed via one RS485 interface with 31 H-System HART Multiplexers ... Each H-System HART Multiplexer (HID MUX 2700) provides communication to 32 HART devices . This allows up to 992 field devices to be addressed via one RS485 interface with 31 H-System HART Multiplexers. ...
The process industry is picking up on digital data transfer via fieldbus The advantages are clear: much less wiring saves costs and time during planning, installation and commissioning ... of the selected field bus standard In addition, the power reserve of each fieldbus segment is calculated. The procedure can then look as follows: Connect all segments and field instrumentation as well as the field bus power supply Visually check the shielding ...
See Overview: H System switch amplifiers from Pepperl+Fuchs consist of three primary components: the power supply, the transistor switch amplifier and the output stage Galvanic isolation separates the input, output and power supply circuits ... ( NAMUR ). This means the residual voltage in normal operation is approximately 8 VDC and the short circuit current is approximately 8 mA. The switch points are typically between 1.2-2.1 mA. Many Pepperl+Fuchs isolators offer optional lead breakage ...
21-30/169Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.