Serviceline Industrial Sensors
Serviceline Explosion Protection

Subrack K-RACK.2.**.*.*.WW.01-Y*******

K-RACK.2.**.*.*.WW.01-Y*******
  • Subrack for K-System
  • Replacement for subrack of the E-System
  • Max. 33 slots for isolators
  • Short design (211 mm mounting depth)
  • Connection via marshalling patchboards
  • Partial and combined assembly possible
  • Complete wiring according to customer requirements
  • Allows to retain cable routing in the switch cabinet
  • No structural changes on the switch cabinet required

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  K-RACK.2.**.*.*.WW.01-Y*******

Slots
Supplymax. 2 , see section application
Isolatorsmax. 33 , see section application
Supply
Connectionisolator power supply via marshalling patchboards or Power Rail
Nominal voltage24 V DC , in consideration of rated voltage of used isolators
Fusingmax. 4 A , in consideration of rated voltage of used isolators
Redundancyredudnancy possible, depends on the used power feed module
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61439-1:2011 (J.9.4.2 b) , EN 61439-2:2011
RoHS
Directive 2011/65/EU (RoHS)EN IEC 63000:2018
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Connection
Field sidemarshalling patchboards
Control sidemarshalling patchboards
Supplymarshalling patchboards or Power Rail
Core cross sectionfield side: max. 2.5 mm2
control side: max. 2.5 mm2
internal signal wiring: 0.25 mm2
supply: max. 1.5 mm2
Material
Housinggalvanized steel
Surfacegalvanized , vibratory finishing
Massapprox. 4 kg , without modules
Dimensions485 mm x 132 mm x 250 mm (W x H x D)
Height132 mm
Width485 mm
Depth250 mm
Mountingslotted hole 8 x 10 mm
Groundingvia front fastening M8 , via lateral fastening on both sides M5
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027219090
ECLASS 12.027219090
ECLASS 11.027219290
ECLASS 10.0.127219290
ECLASS 9.027219290
ECLASS 8.027219290
ECLASS 5.127279201
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC003015
UNSPSC 12.132101514

Details: K-RACK.2.**.*.*.WW.01-Y*******

Function

The device is a subrack for K-System isolators, which replaces the E-card subrack.

A maximum of 33 isolators can be mounted on the device. The isolator modules are mounted on the DIN mounting rail.

The isolators can be supplied via marshalling patchboards or via the power rail.

Faults can be forwarded to the control via the power rail for evaluation.

The signals are transmitted to the field and control side via marshalling patches.

Product Documentation: K-RACK.2.**.*.*.WW.01-Y*******

Language Selection:
Safety and Security DocumentationLanguageFile TypeFile Size
Instruction manualENGPDF139 KB

Approvals: K-RACK.2.**.*.*.WW.01-Y*******

Language Selection:
Declaration of ConformityCert No.LanguageFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4835ALLPDF264 KB
Safety Products Selector

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.