Not available for purchase
Inductive sensor NCB15+U4+N0
- Comfort series
- 15 mm flush
NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NCB15+U4+N0
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 15 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 12.15 mm | |
| Actual operating distance | 13.5 ... 16.5 mm typ. | |
| Reduction factor rAl | 0.28 | |
| Reduction factor rCu | 0.25 | |
| Reduction factor r304 | 0.75 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 400 Hz | |
| Hysteresis | 1 ... 15 typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | yes | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 5128 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Electromagnetic compatibility | NE 21:2007 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0021X | |
| Equipment protection level Gb | IECEx PTB 11.0021X | |
| Equipment protection level Da | IECEx PTB 11.0021X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2032 X | |
| Equipment protection level Gb | PTB 00 ATEX 2032 X | |
| Equipment protection level Da | PTB 00 ATEX 2032 X | |
| FM approval | ||
| Control drawing | 116-0165 | |
| UL approval | ||
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0451 | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | ||
| Hazardous Location | 2020322315002302 | |
| NEPSI approval | ||
| NEPSI certificate | GYJ16.1394X | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT/metal | |
| Sensing face | PBT | |
| Degree of protection | IP68 | |
| Dimensions | ||
| Height | 40 mm | |
| Width | 40 mm | |
| Length | 118 mm | |
| Note | Tightening torque: 1.8 Nm (housing) | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NCB15+U4+N0
Datasheet: NCB15+U4+N0
| Datasheet | File Type | File Size |
|---|---|---|
| 数据表 NCB15+U4+N0 | 310 KB | |
| Datasheet NCB15+U4+N0 | 232 KB | |
| Datasheet NCB15+U4+N0 | 193 KB | |
| Fiche de données NCB15+U4+N0 | 230 KB | |
| Datenblatt NCB15+U4+N0 | 195 KB | |
| Scheda tecnica NCB15+U4+N0 | 230 KB | |
| Datasheet NCB15+U4+N0 | 235 KB | |
| Folha de dados NCB15+U4+N0 | 231 KB | |
| Hoja de datos NCB15+U4+N0 | 230 KB | |
| Datasheet NCB15+U4+N0 | 241 KB |
Documents: NCB15+U4+N0
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 189 KB | |
| Návod k poużití | 182 KB | |
| Instruktions manual | 180 KB | |
| Instruction manual | 182 KB | |
| Kasutusjuhend | 176 KB | |
| Käyttöohje | 175 KB | |
| Manuel d'instructions | 185 KB | |
| Betriebsanleitung | 183 KB | |
| Οδηγίες χρήσης | 192 KB | |
| Handleiding | 181 KB | |
| Instruction manual / Betriebsanleitung | 180 KB | |
| Használati útmutató | 185 KB | |
| Manuale di istruzioni | 183 KB | |
| Lietošanas pamācība | 181 KB | |
| Instrukciju vadovas | 182 KB | |
| Instrukcja obsługi | 244 KB | |
| Manual de instruções | 185 KB | |
| Manual de utilizare | 185 KB | |
| Návod na poużitie | 183 KB | |
| Navodila za uporabo | 180 KB | |
| Manual de instrucciones | 185 KB | |
| Manual | 180 KB | |
| Technical information | ||
| Installation conditions | 210 KB | |
| Einbaubedingungen | 210 KB |
CAD+CAE: NCB15+U4+N0
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 181 KB |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 53 KB |
Approvals+Certificates: NCB15+U4+N0
| Certificates | File Type | File Size |
|---|---|---|
| Canada USA CSA Ordinary Location | 99 KB | |
| Canada USA UL Hazardous Location | 412 KB | |
| Canada USA UL Ordinary Location | 1806 KB | |
| China SITIIAS CCC Ex Certificate | 6000 KB | |
| EU PTB ATEX ia 2G, 1G, 1D s. certificate | 29293 KB | |
| Worldwide PTB IECEx ia | LINK | --- |
| Control Drawings | ||
| Control drawing FM / Control drawing FM | 686 KB | |
| Control drawing UL / Control drawing UL | 294 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 101 KB |
Associated Products: NCB15+U4+N0
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
sales@sg.pepperl-fuchs.com
+65 6779 9091
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.