Serviceline Industrial Sensors
Serviceline Explosion Protection

Magnet system tester MT 01

MT 01
  • Battery operated
  • Display of the magnetic flux density

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  MT 01

Product Description
Magnet system tester for magnet systems in hydraulic cylinders
Electrical specifications
Operating voltage9 V monobloc battery,
accessible via cover at the rear wall of housing
Ambient conditions
Operating temperature0 ... 70 °C (32 ... 158 °F)
Mechanical specifications
Degree of protectionIP40
Material
Housingblack ABS
Dimensions
Height24 mm
Width65 mm
Length100 mm

Classifications

SystemClasscode
ECLASS 13.019200504
ECLASS 12.019200504
ECLASS 11.019200504
ECLASS 10.0.119200504
ECLASS 9.019200504
ECLASS 8.027279211
ECLASS 5.127279211
ETIM 9.0EC000305
ETIM 8.0EC000305
ETIM 7.0EC000305
ETIM 6.0EC000305
ETIM 5.0EC003015
UNSPSC 12.141113642

Details: MT 01

Function

The magnetic system tester MT 01 serves for checking the magnetic system in hydraulic cylinders.

The magnetic field sensor MB-F32 -...enables the detection of the piston position through the wall of a steel cylinder possible. Additionally a magnetic system must be built in the piston. With the magnetic system tester MT 01 it can be checked that a sufficient magnetic field for the function of the MB-F32 -... is produced.

The piston with the magnetic system must pass through at least once the stroke of the cylinder.

For examination the magnetic system tester is held toward the longitudinal axis directly on the surface of the cylinder. The device is activated by pressing the "test" button.

10 LEDs indicate the magnetic flux density on the surface of the cylinder.