Serviceline Industrial Sensors
Serviceline Explosion Protection

Redundancy Module PS1000-D2-24.40.RM

PS1000-D2-24.40.RM
  • 12 V DC to 28 V DC input
  • 2 inputs with 1 output
  • Output 24 V DC, 40 A
  • Housing width 36 mm
  • Built-in decoupling mosfets for 1+1 and N+1 redundancy
  • Only 72 mV voltage drop at 20 A output current
  • Only 1.7 W loss at 2 x 10 A and 5.9 W at 2 x 20 A input current
  • Reverse input polarity protection
  • Suitable for Zone 2/Div. 2 mounting

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  PS1000-D2-24.40.RM

Electrical specifications
Voltage dropinput to output
72 mV at input 2 x 10 A
140 mV at input 2 x 20 A
Power dissipation0.23 W no load
1.7 W at input 2 x 10 A
5.9 W at input 2 x 20 A
Input
Rated voltage12 ... 28 V
Voltage range8.4 ... 36.4 V DC
Current2 x 20 A at ambient temperature < 60 °C (140 °F)
2 x 15 A at ambient temperature 70 °C (158 °F)
2 x 20 ... 32.5 A for up to 5 s
for lower output currents see technical information
Output
Voltage range12 ... 28 V DC
Current40 A at ambient temperature < 60 °C (140 °F)
30 A at ambient temperature < 70 °C (158 °F)
65 A for up to 5 s
max. 26 A in overload or short circuit mode (voltage < 6 V DC)
Galvanic isolation
Input/OutputSELV/PELV
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUIEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4
Low voltage
Directive 2014/35/EUEN 61010-1
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000:2019
Conformity
Degree of protectionEN 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity5 ... 95 %, noncondensing
Shock resistance20 g , 11 ms or 30 g , 6 ms
Vibration resistance2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Mechanical specifications
Housing materialaluminum alloy , galvanized steel
Degree of protectionIP20
Connection
Inputscrew terminals
conductor cross section: max. 6 mm2 (AWG 20-10)
cable diameter: max. 2.8 mm, wire end ferrules included
stripped insulation length: 7 mm
tightening torque: recommendet 0.8 Nm
Outputscrew terminals
conductor cross section: max. 16 mm2 (AWG 22-8)
cable diameter: max. 5.2 mm, wire end ferrules included
stripped insulation length: 12 mm
tightening torque: recommendet 1.2 Nm
Massapprox. 280 g  
Dimensions36 x 124 x 127 mm (W x H x D) , without DIN mounting rail
Height124 mm
Width36 mm
Depth127 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
ATEX approval
ATEX certificateEPS 11 ATEX 1 312 X
ATEX markingEx-Hexagon II 3G Ex ec II T4 Gc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-7:2016 , EN 60079-15:2010
International approvals
UL approvalE223176
IECEx approval
IECEx certificateIECEx EPS 20.0057X
IECEx markingEx ec IIC T4 Gc
StandardsIEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027040790
ECLASS 12.027040790
ECLASS 11.027040790
ECLASS 10.0.127040790
ECLASS 9.027040790
ECLASS 8.027049090
ECLASS 5.127049090
ETIM 9.0EC002542
ETIM 8.0EC002542
ETIM 7.0EC002542
ETIM 6.0EC002542
ETIM 5.0EC002542
UNSPSC 12.139121004

Details: PS1000-D2-24.40.RM

Function

The device is a redundancy module for building redundant power supply systems.

The device is equipped with 2 inputs and 1 output. Power supplies with an output current of up to 20 A and one output can be connected to the inputs. The power supplies can transmit a rated current of up to 40 A and 40 A to 65 A for 5 s.

The both inputs are decoupled by MOSFETs. This reduces heat generation and voltage drop between input and output.

The device is mounted on a 35 mm DIN mounting rail according to EN 60715.

Product Documentation: PS1000-D2-24.40.RM

Language Selection:
Product informationLanguageFile TypeFile Size
Technical informationENGPDF2606 KB
Safety and Security Documentation
Instruction manual / BetriebsanleitungALLPDF225 KB
Instruction manual / BetriebsanleitungALLPDF291 KB

Design / Simulation: PS1000-D2-24.40.RM

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP3662 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ187 KB

Approvals: PS1000-D2-24.40.RM

Language Selection:
CertificatesCert No.LanguageFile TypeFile Size
Bureau Veritas IECEx Certificate of ConformityIECEx EPS 20.0057XALLLINK---
Canada, USA CSA Hazardous LocationCoC 80059967ALLPDF84 KB
China SITIIAS CCC Ex Certificate2023122303116293 (Mannheim)ALLPDF519 KB
Europe Bureau Veritas ATEX Category 3 GEPS 11 ATEX 1 312XALLPDF1011 KB
US CA ULCoC E223176 RptRef E223176-20070416ALLPDF444 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4794ALLPDF73 KB

Associated Products: PS1000-D2-24.40.RM

Accessory of
100 V AC to 240 V AC wide-range input, Output 12 V DC, 16 A, 192 W, 1-phase, Housing width 39 mm, Efficiency up to 94.3 %, Minimal inrush current surge, Remote control for ON/OFF, DC OK relay contact, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 12 V DC, Voltage range: 12 ... 15 V DC
factory setting: 12 Vpa
100 V AC to 240 V AC wide-range input, Output 24 V DC, 20 A, 480 W, 1-phase, Housing width 48 mm, Efficiency up to 95.6 %, Minimal inrush current surge, DC OK relay contact, Current sharing for parallel use, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 24 V DC, Voltage range: 24 ... 28 V DC
factory setting: 24.1 Vpa