Serviceline Industrial Sensors
Serviceline Explosion Protection

Fiber optic sensor MLV41-LL-IR-2492

MLV41-LL-IR-2492
  • Robust fiber optic sensor for reliable operation under all conditions
  • Adjustable continuous sensitivity
  • Easy fiber optic installation with quick-action clamping lock
  • Aluminum housing with high-quality Delta Seal coating

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  MLV41-LL-IR-2492

Product Description
Robust fiber optic sensor for glass fiber optics, infrared light, PNP outputs, M12 plug
General specifications
Sensor rangeon black (6 %): up to 55 mm
on Kodak white, reflection factor 90% up to 160 mm
with LLR 04-1.6-0.5-WC3 fiberoptic cable
Adjustment range0 ... 160 mm on Kodak white, reflection factor 90%
Reference target100 mm x 100 mm on Kodak white, reflection factor 90%
Light sourceIRED
Light typemodulated infrared light , 880 nm
Functional safety related parameters
MTTFd770 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicatorLED yellow, lights up with receiver lit ; flashes when falling short of the operating reserve
Control elementsSensitivity adjuster, light/dark switch
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply currentmax. 40 mA
Output
Switching typelight/dark on switchable
The switching modes specified in the "Electrical Connection" section apply to L/D switches in the "L" position (light switch)
Signal output2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 2.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 functional insulation acc. to DIN EN 50178
UL approvalcULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Fiber optic adapter04
Degree of protectionIP67
Connection4-pin, M12 x 1 connector
Material
HousingAluminum , Delta-Seal coated
Optical faceFiber optic connection
Connectormetal
Mass50 g
Dimensions
Height56.5 mm
Width31 mm
Depth13.6 mm

Classifications

SystemClasscode
ECLASS 13.027270905
ECLASS 12.027270905
ECLASS 11.027270905
ECLASS 10.0.127270905
ECLASS 9.027270905
ECLASS 8.027270905
ECLASS 5.127270905
ETIM 9.0EC002651
ETIM 8.0EC002651
ETIM 7.0EC002651
ETIM 6.0EC002651
ETIM 5.0EC002651
UNSPSC 12.139121528

Details: MLV41-LL-IR-2492

Function

The unique and extremely popular design of the MLV41 series enables it be mounted correctly in confined areas and offers all the functions that are normally only found on larger phototelectric sensors. The MLV41 series comes with a range of functions. For example, highly visible status LEDs on the front and back, resistance to ambient light, crosstalk protection and universally applicable output stages that permit every possible switching logic and polarity to be realized. The enhanced resistance to ambient light ensures reliable operation even where modern energy-saving lamps with electronic ballasts are in use. The same applies where multiple devices are present, i.e. the use of a number of sensors in the same vicinity causes no problems.

Product Documentation: MLV41-LL-IR-2492

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF418 KB

Approvals: MLV41-LL-IR-2492

Language Selection:
CertificatesCert No.LanguageFile TypeFile Size
Canada USA UL Ordinary LocationE87056ALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-1846CALLPDF309 KB

Associated Products: MLV41-LL-IR-2492

Accessories

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa
Glass fiber optic - diffuse with PVC covering, Series: Glass fiber optic - diffuse, End piece: Cylindrical, Sheathing: PVC, Device series: MLV41-LLfa
Glass fiber optic - diffuse with metal silicone covering, Series: Glass fiber optic - diffuse, End piece: thread, Sheathing: Metal-silicon, Special features: High temperature, Device series: MLV41-LLfa
Glass fiber optic - diffuse with PVC covering, Series: Glass fiber optic - diffuse, End piece: Thread / cylindrical right angle, Sheathing: PVC, Device series: MLV41-LLfa
Glass fiber optic - diffuse with metal silicone covering, Series: Glass fiber optic - diffuse, End piece: Thread / cylindrical right angle, Sheathing: Metal-silicon, Special features: High temperature, Device series: MLV41-LLfa
Glass fiber optic - thru-beam with PVC covering, Series: Glass fiber optic - thru-beam, End piece: thread, Sheathing: PVC, Device series: MLV41-LLfa
Glass fiber optic - thru-beam with metal silicone covering, Series: Glass fiber optic - thru-beam, End piece: thread, Sheathing: Metal-silicon, Special features: High temperature, Device series: MLV41-LLfa
Glass fiber optic - thru-beam with PVC covering, Series: Glass fiber optic - thru-beam, End piece: Thread / cylindrical right angle, Sheathing: PVC, Device series: MLV41-LLfa
Glass fiber optic - thru-beam with metal silicone covering, Series: Glass fiber optic - thru-beam, End piece: Thread / cylindrical right angle, Sheathing: Metal-silicon, Special features: High temperature, Device series: MLV41-LLfa