Serviceline Industrial Sensors
Serviceline Explosion Protection
Not available for purchase

IO-Link Master IO-Link-Master01-USB

IO-Link-Master01-USB

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  IO-Link-Master01-USB

Product Description
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connection
Indicators/operating means
Function indicatorcommunication: LED green
status display: LED yellow
diagnostic display: LED red
Electrical specifications
Operating voltage24 V DC
Interface
Interface typeIO-Link
ProtocolIO-Link V1.0
Approvals and certificates
ApprovalsCE
Mechanical specifications
Degree of protectionIP20 (when properly connected)
ConnectionIO-Link port: 5-pin, M12x1 socket, A-coded
Operating voltage : DC-9, 2.1 mm
USB : USB-Male Connector Typ B
Material
Housingaluminum

Documents: IO-Link-Master01-USB

Product informationLanguageFile TypeFile Size
Product information - Sensors and Systems with IO-LinkFRAPDF3861 KB
Product information - Sensors and Systems with IO-Link (USA)USAPDF3959 KB

Associated Products: IO-Link-Master01-USB

Accessory of
Parameterization and diagnosis via IO-Link, 3 configurable switching frames, Housing material: PA 66, Connection type: 2 m PUR cable , screened, Type of voltage: DC, Degree of protection: IP67fa
Parameterization and diagnosis via IO-Link, Analog output 0 ... 10 V, Measuring range 0 ... 14 mm, Screened lead 2 m, Housing material: diecast zinc, not laquered or coated, Connection type: 2 m PUR cable , screened, Type of voltage: DC, Degree of protection: IP67fa
Parameterization and diagnosis via IO-Link, 3 configurable switching frames, Measuring range 0 ... 14 mm, Screened lead 2 m, Housing material: diecast zinc, not laquered or coated, Connection type: 2 m PUR cable , screened, Type of voltage: DC, Degree of protection: IP67fa
Parameterization and diagnosis via IO-Link, 3 configurable switching frames, Measuring range 0 ... 14 mm, Screened lead 2 mfa
Parameterization and diagnosis via IO-Link, Analog output 0 ... 10 V, Measuring range 0 ... 14 mmfa
Parameterization and diagnosis via IO-Link, 3 configurable switching frames, Measuring range 0 ... 14 mmfa
Parameterization and diagnosis via IO-Link, 2 configurable switching frames, Measuring range 0 ... 14 mmfa
Accessories
Connection cable, M12 to M12, 8/4-pin, PUR cablefa
Communication DTM for use of IO-Link-Masterfa
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Software for the integration of IODDs in a frame application (e. g. PACTware)fa
Connecting cable, M12 to M12, PUR cable 5-pinfa

Function: IO-Link-Master01-USB

The IO-Link USB master is used for communication with IO-Link devices. Its purpose is to connect IO-Link sensors to a PC USB port. Following installation of the supplied FDT tools, connected IO-Link sensors can be conveniently configured and parameterized. Sensor diagnostics is also possible. For sensors with a low current consumption, power is supplied directly via the USB master. For sensors with a higher current consumption, an additional external power supply is available. The device is extremely well suited for testing purposes and for commissioning and service operations.