Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UCC4000-50GK-B26-8MOL

  • Thread M50
  • PTFE coated transducer
  • Power save mode
  • PWM output
  • Physical LIN interface
  • Serial Interfaces
  • Temperature compensation

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för  UCC4000-50GK-B26-8MOL

Product Description
Single head system
General specifications
Sensing range250 ... 4000 mm
Dead band0 ... 250 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 75 kHz
Electrical specifications
Operating voltagefor UART and PWM operation:
UUART/PWM = 2.5 ... 5 V DC, typical 3.3 V
for LIN operation:
ULIN = 8 ... 18 V DC, typical 12 V
No-load supply current≤ 60 mA at 3.3 V DC
≤ 20 mA at 12 V DC
Quiescent current indication< 3 µA during standby mode at UART- and PWM operation
Power consumption≤ 250 mW in the measurement operating mode
Time delay before availability≤ 95 ms
Interface 1
Interface typePhysical LIN interface
Transfer rate19.2 kBit/s (8N1)
Cycle time80 ms
Resolution16 mm (corresponding to 1 LSB)
Interface 2
Interface typeUART 3.3V
Transfer rate19.2 kBit/s (8N1)
Cycle time80 ms
Resolution16 mm (corresponding to 1 LSB)
Input typeStandby active
Signal levellow: 0 ... 0.8 V
Output typePWM output (PNP) , not short-circuit protected
Resolutionpulse length 10 µs /cm
Output rated operating currentmax. 10 mA
Temperature influence3 % of full-scale value over the entire temperature range
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 60947-5-2:2007+A1:2012 : chapter,, 8.6.3
The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable L = 276 mm ± 20 mm with Molex connector 70107-0007, 8-pin
Degree of protectionIP66 / IP67 ( connector excluded )
Transducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated
Mass100 g
Factory settings
OutputPWM output (PNP)
Temperature compensation
Address setting 7
Beam widthwide
General information
Scope of delivery2 nuts plastic


ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849

Documents: UCC4000-50GK-B26-8MOL

ManualsLanguageFile TypeFile Size
Manual Ultrasonic Sensors Series UCC****-50GK-B26ENGPDF2313 KB
Handbuch Ultraschallsensoren UCC****-50GK-B26-SerieGERPDF2333 KB

Approvals+Certificates: UCC4000-50GK-B26-8MOL

Statements of complianceCert No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4199PDF77 KB
USi-safety Sensor System

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.