Serviceline Industrial Sensors
Serviceline Explosion Protection
Ej tillgänglig för köp

Singleturn absolute encoder AVS42H-0

AVS42H-0
  • Sturdy construction
  • Highly shock / vibration and soiling resistant
  • Increased shaft load capacity
  • SSI interface
  • Stainless steel housing
  • IP69K
  • Very small housing

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Ladda ned datablad som PDF::


Utdrag ur datablad: Tekniska data för  AVS42H-0

Product Description
Heavy-duty encoder
General specifications
Detection typemagnetic sampling
Nominal ratings
Linearity error± 0.36 °
Electrical specifications
Operating voltage4.5 ... 30 V DC
Power consumption≤ 1.5 W
Linearity± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output codeGray code, binary code
Code course (counting direction)cw descending (clockwise rotation, code course descending)
Interface
Interface typeSSI
Monoflop time20 ± 10 µs
Resolution
Single turnup to 13 Bit
Overall resolutionup to 13 Bit
Transfer rate0.1 ... 2 MBit/s
Voltage dropUB - 2.5 V
Standard conformityRS 422
Input 1
Input typeSelection of counting direction (cw/ccw)
Signal voltage
High4.5 V ... UB (cw descending)
Low0 ... 2 V or unconnected (cw ascending)
Input current< 6 mA
Switch-on delay< 1.1 s
Input 2
Input typezero-set (PRESET 1) with falling edge
Signal voltage
High4.5 V ... UB
Low0 ... 2 V
Input current< 6 mA
Connection
ConnectorM12 connector, 8-pin
Standard conformity
Degree of protectionacc. DIN EN 60529
Climatic testingDIN EN 60068-2-3 , 95 % , no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 300 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 30 g, 55 ... 2000 Hz
Ambient conditions
Operating temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity95 % , no moisture condensation
Mechanical specifications
Flangeservo flange 42 mm with 4 x Threading M4
Shaft dimensions10 mm x 21 mm
Degree of protectionIP66 / IP68 / IP69K
Material
Housingstainless steel 1.4404 / AISI 316L
Flangestainless steel 1.4404 / AISI 316L
ShaftStainless steel 1.4412 / AISI 440B
Massapprox. 350 g
Rotational speedmax. 6000 min -1
Moment of inertia30 gcm2
Starting torque< 5 Ncm
Shaft load
Axial270 N
Radial270 N

Documents: AVS42H-0

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF729 KB