Serviceline Industrial Sensors
Serviceline Explosion Protection

Cable pull rotary encoder ECA10TL - SSI

ECA10TL - SSI
  • Solid yet lightweight plastic construction
  • Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing)
  • Coupling-free adaptation
  • Wide range of mounting options
  • Rust and acid-resistant measuring cable
  • Very high level of linearity and repeatability
  • SSI interface
  • Free of wear magnetic sampling
  • Additionally push buttons for preset function (only model characteristic SB2, SG2)

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::


Utdrag ur datablad: Tekniska data för  ECA10TL - SSI

Product Description
Cable pull rotary encoder with SSI interface
General specifications
Detection typemagnetic sampling
Device typeTarget line with SSI interface
Measuring range3000 ... 10000 mm
Construction type80 mm, 130 mm, 190 mm
ResolutionCable pull:
design 80 mm: with 13 Bit 0,028 mm; with 12 Bit 0,056 mm
design 130 mm: with 13 Bit 0,047 mm; with 12 Bit 0,094 mm
design 190 mm: with 13 Bit 0,068 mm; with 12 Bit 0,0135 mm
Encoder:
standard 25 Bit (13 Bit/revolution) or as an option 24 Bit (12 Bit/revolution)
Electrical specifications
Operating voltage4.75 ... 30 V DC
No-load supply currenttyp. 50 mA
Power consumptionapprox. 1.5 W
Output codeGray code, binary code
Code course (counting direction)adjustable
Interface
Interface typeSSI
Transfer rate0.1 ... 2 MBit/s
Cycle time< 100 µs
Standard conformityRS 422
Input 1
Input typeSelection of counting direction (cw/ccw)
Signal voltage
High4.75 V ... UB (cw descending)
Low0 ... 2 V or unconnected (cw ascending)
Input current< 6 mA
Input 2
Input typezero-set (PRESET 1) with falling edge
Signal voltage
High4.75 V ... UB
Signal durationmin. 1.1 s
Connection
ConnectorM12 connector, 8-pin or M23 connector, 12-pin
Cable∅7 mm, 6 x 2 x 0.14 mm2
Standard conformity
Degree of protectionacc. DIN EN 60529
Connection sidecable models: IP65
connector models: IP65
Cable pull: IP50
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Ambient conditions
Ambient temperature-30 ... 70 °C (-22 ... 158 °F)
Operating temperature-30 ... 70 °C (-22 ... 158 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Relative humidity98 % , no moisture condensation
Mechanical specifications
Rope diameter0.55 mm
Material
Housingnickel-plated steel
Cable pulldesign 80/130 : Luranyl® or Lexan 920
design 190 : ABS-GF17
FlangeAluminum
RopeStainless steel 1.4401/316
Life spanup to 106 Cycles

Classifications

SystemClasscode
ECLASS 13.027270503
ECLASS 12.027270502
ECLASS 11.027270502
ECLASS 10.0.127270502
ECLASS 9.027270502
ECLASS 8.027270502
ECLASS 5.127270502
ETIM 9.0EC001486
ETIM 8.0EC001486
ETIM 7.0EC001486
ETIM 6.0EC001486
ETIM 5.0EC001486
UNSPSC 12.139121527

Details: ECA10TL - SSI

Informative Literature: ECA10TL - SSI

Language Selection:
LiteratureLanguageFile TypeFile Size
Application Report - Linear Position Measurement for Pipe Handlers on Offshore Oil RigsENGPDF328 KB
Application Report - Precise Heigh Measurement with Autonomous ForkliftsENGPDF191 KB

Product Documentation: ECA10TL - SSI

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF5459 KB
Manuals
Manual EC*SL*, Cable-PullENGPDF3917 KB

Approvals: ECA10TL - SSI

Language Selection:
CertificatesCert No.LanguageFile TypeFile Size
US CA ULCoC 20190913-E223176 RptRef E223176-20081013ALLPDF280 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0924CALLPDF323 KB