Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
WTS10-12/20/105
| Product Description |
| Diffuse mode sensor |
| General specifications |
| Detection range | 2 ... 12 mm |
| Reference target | Copper welding-electrode Diameter: 16 mm , Front end: 6 mm |
| Light source | LED |
| Light type | modulated visible red light , 640 nm |
| Ambient light limit | continuous light 40000 Lux , Modulated light 5000 Lux |
| Tilting angle | ± 1.5 ° |
| Position tolerance | ± 2 mm |
| Indicators/operating means |
| Operation indicator | LED green: Power on |
| Function indicator | LED yellow: switching state
LED red: Stability alarm indicator |
| Teach-in indicator | LED, green/yellow flashing (approx. 4 Hz)
Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
| Control elements | Teach-In key |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| No-load supply current | ≤ 70 mA |
| Output |
| Switching type | light-on |
| Signal output | 2 switch outputs PNP, NO short-circuit protected reverse polarity protected |
| Switching current | max. 100 mA |
| Switching frequency | 100 Hz |
| Response time | 5 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Compliance with standards and directives |
| Standard conformity | |
| Shock and impact resistance | IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| Approvals and certificates |
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval | cULus Listed |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F)
The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 5-pin, M12 x 1 connector |
| Material | |
| Housing | PC + ABS |
| Optical face | Scratch resistant mineral glass lens |
| Mass | 80 g |
| Dimensions | |
| Height | 90 mm |
| Width | 50 mm |
| Length | 20 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
WTS10-12/20/105
Product Documentation:
WTS10-12/20/105
Design / Simulation:
WTS10-12/20/105
Approvals:
WTS10-12/20/105
Associated Products:
WTS10-12/20/105
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 5-pin, PVC cable greyfa |
|
|
|
|
| Mounting bracket for sensors of WTS10 seriesfa |
|
+46 303 246070