Serviceline Industrial Sensors
Support en ligne pour la protection contre le risque d’explosion

5500 manifold, FM & CSA certified 5500-MAN-CD01-*

5500-MAN-CD01-*
  • Suitable for Class I,II/Div. 1 & 2 for hazardous locations
  • Certifications for FM and CSA
  • Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
  • Suitable for steel or plastic tubing
  • Mounting hardware, pneumatic fittings and tubing included

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF ::


Caractéristiques techniques  5500-MAN-CD01-*

General specifications
Operating modeautomatic purging
Series5500
Hazardous environmentgas or dust
Supply
Rated power24 VDC: 4.6 W
120 VAC: 6.8 VA, 60 Hz
230 VAC: 6.8 VA, 60 Hz
Voltage tolerance: +/-10%
Electrical specifications
Fuse ratingDC: 500 mA
AC: 80 mA
(fuse rating on 5500 control unit)
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement1.4 bar (20 psi) to 8.2 bar (120 psi)
Purge flow ratesolenoid valves : Cv (flow coefficient) = 1.4
needle valve : Cv (flow coefficient) = 0.25
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Connection typePneumatic
Input port: 3/8 inch Tube compression fitting
Output port: 3/8" Tube compression fitting

Electrical connection
½" NPTF thread connection w/ 24" (0.61m) flying leads
Degree of protectiontype 7 & 9
Material
Housing: anodized aluminum
3/8" compression fittings: 316 stainless steel
Pressure ports: 3/8" NPTF
Bulkhead fitting: 316 stainless steel
Mounting bolts: 1/4 - 20, 316 stainless steel
Sealing washers: UL recognized type 4X
Mass1250 g (2.8 lb)
Dimensionssee dimensions
International approvals
FM approvalFM3006713
Explosion proof: Class I, Divison 1, Group A-D, T4, Ta = 60C
DIP: Class II, Division 1, Groups F+G, T4, Ta = 60C
Nonincendive: Class I, Division 2, Groups A-D, T4, Ta = 60C

Suitable for Class II, Division 2, Groups F+G, T4, Ta = 60C
CSA approvalCSA 202633
Class I, Division 1, Groups A-D: Class II, Groups E,F,G
Class I, Division 2, Groups A-D

Classifications

SystemClasscode
ECLASS 13.027180591
ECLASS 12.027180591
ECLASS 11.027180591
ECLASS 10.0.127291390
ECLASS 9.027291390
ECLASS 8.027291390
ECLASS 5.140050501
ETIM 9.0EC000243
ETIM 8.0EC000243
ETIM 7.0EC000243
ETIM 6.0EC000243
ETIM 5.0EC000243
UNSPSC 12.139121303

Details: 5500-MAN-CD01-*

Design / Simulation: 5500-MAN-CD01-*

Language Selection:
CADLangueType de fichierTaille
CAD 2-D / CAD 2-DALLZIP222 KB

Approvals: 5500-MAN-CD01-*

Language Selection:
CertificatesIdentificationLangueType de fichierTaille
Canada CSA202633ALLLINK---
USA FM110221ALLLINK---

Produits associés : 5500-MAN-CD01-*

Accessory of
Bebco EPS 5500 series Type Z & Ex pzc purge and pressurization control unitpa
pa
pa

Découvrez la façon la plus intelligente de garantir la protection des zones à risques d'explosion et de configurer votre système individuel de purge et pressurisation !

Notre application interactive vous propose une simulation de programmation étape par étape pour votre système de purge et de pressurisation. Téléchargez dès maintenant l'application gratuite pour iOS ou Android…

Unités de purge Ex p

Découvrez la toute nouvelle série 5500. Ces unités de purge compactes vous offrent une protection entièrement automatique.