Fabrika Otomasyonu
Proses Otomasyonu

Satışta değil

Bu ürün değiştirilmiştir.Yedek ürüne gidin NMB2-12GM65-E2-NFE-V1
Satışta değil

Inductive sensor NMB2-12GM75-E2-NFE-V1

  • Active surface metal

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler  NMB2-12GM75-E2-NFE-V1

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance2 mm
Installationflush in mild steel
Output polarityDC
Assured operating distance0 ... 1.62 mm
Reduction factor rAl 1
Reduction factor rCu 1.1
Reduction factor r304 0
Reduction factor rSt37 0
Nominal ratings
Operating voltage10 ... 30 V
Switching frequency0 ... 15 Hz
Hysteresis3 ... 15 typ. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2 V
Operating current0 ... 200 mA
Off-state current0 ... 10 µA typ. 0.1 µA at 25 °C
No-load supply current≤ 10 mA
Switching state indicatorLED, yellow
Standard conformity
StandardsIEC / EN 60947-5-2:2004
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Housing materialStainless steel
Sensing faceStainless steel
Housing diameter12 mm
Degree of protectionIP67


CADDosya TipiDosya Boyutu
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS79 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP62 KB

İlişkili Ürünler: NMB2-12GM75-E2-NFE-V1

Mounting flange, 12 mmfa
Female cordset, M12, 4-pin, PUR cablefa
Female cordset, M12, 4-pin, PUR cablefa