Serviceline
Fabrika Otomasyonu
Proses Otomasyonu

Inductive sensor NBB1,5-8GM40-E2-C-V3

NBB1,5-8GM40-E2-C-V3
  • 1.5 mm flush
  • Weld Immune

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  NBB1,5-8GM40-E2-C-V3

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance1.5 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 1.215 mm
Reduction factor rAl 0.3
Reduction factor rCu 0.25
Reduction factor r304 0.65
Output type3-wire
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency0 ... 1800 Hz
Hysteresistyp. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 3 V
Operating current0 ... 100 mA
No-load supply current≤ 20 mA
Constant magnetic field100 mT
Alternating magnetic field100 mT
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd2240 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeConnector plug M8 x 1 , 3-pin
Housing materialBrass, PTFE coated
Sensing facePPS; Ryton R4
Degree of protectionIP67

Documents: NBB1,5-8GM40-E2-C-V3

Technical informationDilDosya TipiDosya Boyutu
Installation instructions, locking nut / Montageanleitung, Muttern mit SperrverzahnungALLPDF1117 KB
technical information (TI)ENGPDF1053 KB
technische Information (TI)GERPDF1054 KB

Approvals+Certificates: NBB1,5-8GM40-E2-C-V3

Statements of complianceSertifika No.Dosya TipiDosya Boyutu
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3457PDF36 KB
Certificates
Canada USA CSA Ordinary Location1007121PDF99 KB
Canada USA UL Ordinary Location20170306-E87056PDF407 KB

İlişkili Ürünler: NBB1,5-8GM40-E2-C-V3

Accessories
Mounting flange, 8 mmfa
Quick mounting bracket with dead stopfa
Female connector, M8, 3-pin, field attachablefa
Female connector, M8, 3-pin, field attachablefa
Female cordset single-ended, M8, 3-pin, PUR cablefa
Female cordset single-ended, M8, 3-pin, PUR cablefa