Serviceline
Fabrika Otomasyonu
Proses Otomasyonu

Inductive sensor NBN3-8GM30-E2-Y319327

NBN3-8GM30-E2-Y319327
  • Basic series
  • 3 mm non-flush
  • Increased operating distance

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  NBN3-8GM30-E2-Y319327

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance3 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 2.43 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.5
Reduction factor r304 0.75
Output type3-wire
Nominal ratings
Operating voltage10 ... 30 V
Switching frequency0 ... 2000 Hz
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 3 V
Operating current0 ... 100 mA
Off-state current0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current≤ 15 mA
Switching state indicatorLED, yellow
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalUL Recognized
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeCable connector with PVC cable , L = 100 mm
Connection assemblyMolex housing 43020-0409
Molex contact 43031-0006
Core cross-section0.14 mm2
Housing materialbrass, nickel-plated
Sensing facePBT
Degree of protectionIP67

Approvals+Certificates: NBN3-8GM30-E2-Y319327

Statements of complianceSertifika No.Dosya TipiDosya Boyutu
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4002PDF185 KB

İlişkili Ürünler: NBN3-8GM30-E2-Y319327

Accessories
Mounting flange, 8 mmfa