Fabrika Otomasyonu
Proses Otomasyonu

Adapter plate Adaptor plate new VariKont

Adaptor plate new VariKont
  • Simple and fast mounting
  • Suitable for VariKont sensors

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  Adaptor plate new VariKont

Ürün Açıklaması
Adapter plate
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Housing materialPA 6 Grivory GVN-35H
Material
Mounting screw4 units, screw M5 X 20 DIN912 A2
Dimensions
Height7.5 mm
Width47.5 mm
Length94 mm

Classifications

SystemClasscode
ECLASS 13.027273701
ECLASS 12.027273701
ECLASS 11.027273792
ECLASS 10.0.127273792
ECLASS 9.027273792
ECLASS 8.027279202
ECLASS 5.127279202
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC003015
UNSPSC 12.131162301

Details: Adaptor plate new VariKont

Function

When exchanging an NJ40+U... for an NBN40-U..., the detection range changes because of the different head dimensions. By using the adapter plate, all offset dimensions (side, height, and depth offset) are compensated for. Sensor mounting is performed laterally, offset to the center of the adapter plate on both notched tabs.

If insufficient space is available at the side in the area of the base, both notched tabs of the adapter plate can be broken off. During subsequent mounting of an NBN40-U... centered on the adapter plate, the height and depth offset (Y and Z) are compensated for – but not, however, the side offset X.

Design / Simulation: Adaptor plate new VariKont

Dil Seçeneği:
CADDilDosya TipiDosya Boyutu
CAD 3-D / CAD 3-DALLSTP333 KB

İlişkili Ürünler: Adaptor plate new VariKont

Accessory of
Switching function: Normally open (NO), Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: VariKont ®, Series: VariKont ®, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Equipment protection level Gc (ec): IECEx TUR 21.0019X, Equipment protection level Dc (tc): IECEx TUR 21.0020X, Equipment protection level Dc (tc): TÜV 20 ATEX 8526 X, Connection type: screw terminalsfa