* Pepperl+Fuchs makes every effort to provide an answer that is helpful and relevant to you. Your question is typically answered in one business day. Occasionally, an answer is delayed. In these cases, we are often researching your question, conferring with colleagues, or may route your question to another Pepperl+Fuchs location. You will be notified via e-mail regarding the status of your question.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Robust retroreflective sensor for glass detection, compact housing design, 5.2 m detection range, red light, light on, 2 push-pull outputs, M8 plug|
|Effective detection range||0 ... 4 m in TEACH mode
0 ... 5.2 m at switch position "N"
|Reflector distance||0 ... 4 m in TEACH mode
0 ... 5.2 m at switch position "N"
|Threshold detection range||6.5 m
|Reference target||H85-2 reflector|
|Light type||modulated visible red light , 660 nm|
|Angle deviation||max. ± 1°|
|Diameter of the light spot||approx. 100 mm at detection range 4 m|
|Opening angle||1.5 °|
|Ambient light limit||40000 Lux|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|Operation indicator||LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)|
|Function indicator||2 LEDs yellow for switching state, stability control, TEACH-IN and contrast detection mode|
|Control elements||5-step switch for setting the contrast detection levels.
|Contrast detection levels||10 % - clean, water filled PET bottles
18 % - clear glass bottles
40 % - colored glass or opaque materials
adjustable due to Teach-In switch
|Operating voltage||10 ... 30 V DC|
|Ripple||max. 10 %|
|No-load supply current||max. 35 mA|
|Signal output||2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected|
|Switching voltage||max. 30 V DC|
|Switching current||max. 100 mA|
|Voltage drop||≤ 2.5 V DC|
|Switching frequency||1000 Hz|
|Response time||0.5 ms|
|Product standard||EN 60947-5-2|
|Approvals and certificates|
|EAC conformity||TR CU 020/2011|
|UL approval||cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)|
|CCC approval||CCC approval / marking not required for products rated ≤36 V|
|Ambient temperature||-40 ... 60 °C (-40 ... 140 °F)|
|Storage temperature||-40 ... 75 °C (-40 ... 167 °F)|
|Housing width||31 mm|
|Housing height||56.5 mm|
|Housing depth||13.6 mm|
|Degree of protection||IP67|
|Connection||M8 x 1 connector, 4-pin|
|Housing||Aluminum , Delta-Seal coated|
|Optical face||glass pane|
|Instruction leaflets||Language||File Type||File Size|
|Instruction leaflet / Beipackzettel||ALL||499 KB|
|CAD||File Type||File Size|
|3-D model / 3-D-Modell||STP||847 KB|
|CAD Portal / CAD Portal||LINK||---|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-1846C||309 KB|
|Canada USA UL Ordinary Location||E87056||LINK||---|
The unique and extremely popular design of the MLV41 series enables it be mounted correctly in confined areas and offers all the functions that are normally only found on larger phototelectric sensors. The MLV41 series comes with a range of functions. For example, highly visible status LEDs on the front and back, resistance to ambient light, crosstalk protection and universally applicable output stages that permit every possible switching logic and polarity to be realized. The enhanced resistance to ambient light ensures reliable operation even where modern energy-saving lamps with electronic ballasts are in use. The same applies where multiple devices are present, i.e. the use of a number of sensors in the same vicinity causes no problems.
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...