Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Retroreflective sensor ML100-55/95/103

ML100-55/95/103
  • Miniature design
  • Easy to use
  • Very bright, highly visible light spot
  • Full metal thread mounting
  • Clearly visible LEDs for Power ON, switching state and weak signal indication
  • Not sensitive to ambient light
 in stock
86.00 USDUnit Price 

Quantity

Free Shipping

Purchase on Account

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  ML100-55/95/103

Product Description
Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, sensitivity adjuster, light/dark on, DC version, PNP output, M8 plug
General specifications
Effective detection range0 ... 5 m
Threshold detection range7 m
Light sourceLED
Light typemodulated visible red light
Polarization filteryes
Diameter of the light spotapprox. 500 mm at a distance of 7 m
Angle of divergenceapprox. 4 °
Functional safety related parameters
MTTFd860 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
Control elementssensitivity adjustment
Control elementsLight-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is: light on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2:2007+A1:2012
Approvals and certificates
EAC conformityTR CU 020/2011
Mechanical specifications
Degree of protectionIP67
Connectionconnector M8 x 1 , 4-pin
Material
HousingPC (Polycarbonate)
Optical facePMMA

Approvals+Certificates: ML100-55/95/103

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0435DPDF163 KB
Certificates
US CA UL General PurposeE87056LINK---

Associated Products: ML100-55/95/103

Accessories

12.00  USD

In stock

Reflector, round ø 84 mm, central mounting holefa

8.00  USD

In stock

Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for ML100 seriesfa
17.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
19.00  USD

In stock

Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
19.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
19.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
Mounting aidfa
17.00  USD

In stock

Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa
Reflector with mounting holesfa
Reflector with screw fixingfa
Reflective tape 70 mm x 70 mmfa
Reflector with Micro-structure, rectangular 23 mm x 14 mm, diagonal mounting holefa
13.00  USD

In stock

Female cordset, M8, 4-pin, PUR cablefa
13.00  USD

In stock

Female cordset, M8, 4-pin, PUR cablefa
41.00  USD

Contact Us

Mounting bracket fa

Function: ML100-55/95/103

The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.