Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
General specifications | ||
---|---|---|
Signal type | Analog input | |
Supply | ||
Connection | Power Rail or terminals 14+, 15- | |
Rated voltage | 19 ... 35 V DC | |
Ripple | within the supply tolerance | |
Power dissipation | 0.8 W | |
Power consumption | 0.8 W | |
Interface | ||
Programming interface | programming socket | |
Input | ||
Connection side | field side | |
Connection | terminals 1, 2, 3, 4, 5, 6 |
|
Thermocouples | type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) |
|
Voltage | 0 ... 10 V , 2 ... 10 V | |
Current | 0 ... 20 mA , 4 ... 20 mA | |
Load | 20 Ω for 20 mA; 200 kΩ for 10 V | |
Output | ||
Connection side | control side | |
Connection | output I: terminals 7, 8, 9; output II: terminals 10, 11, 12 | |
Output I, II | relay | |
Contact loading | 253 V AC/2 A/500 VA/cos φ min. 0.7; 40 V DC/2 A resistive load | |
Mechanical life | 2 x 107 switching cycles | |
Transfer characteristics | ||
Resolution | temperature: 0.0625 °C, resistance: 62.5 mΩ, voltage: 62.5 µV, current: 625 nA | |
Influence of supply voltage | < 0.001 % of sensor input range | |
Input delay | ≤ 370 ms (rise time and energizing delay of relay) | |
Indicators/settings | ||
Display elements | LEDs | |
Configuration | via PACTware | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Low voltage | ||
Directive 2014/35/EU | EN 61010-1:2010 | |
Conformity | ||
Electromagnetic compatibility | NE 21:2006 | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Mass | approx. 150 g | |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
EU-Type Examination Certificate | BAS 98 ATEX 7152 | |
Marking | ![]() |
|
Certificate | TÜV 99 ATEX 1493 X | |
Marking | ![]() |
|
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
International approvals | ||
UL approval | ||
Control drawing | 116-0173 (cULus) | |
IECEx approval | IECEx BAS 06.0022 | |
Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
System | Classcode |
---|---|
ECLASS 11.0 | 27210122 |
ECLASS 10.0.1 | 27210122 |
ECLASS 9.0 | 27210122 |
ECLASS 8.0 | 27210122 |
ECLASS 5.1 | 27210122 |
ETIM 8.0 | EC002654 |
ETIM 7.0 | EC002654 |
ETIM 6.0 | EC002654 |
ETIM 5.0 | EC001485 |
UNSPSC 12.1 | 32101514 |
Manuals | Language | File Type | File Size |
---|---|---|---|
Installation and configuration guide Device Type Manager (DTM) | ENG | 8665 KB | |
Manual KFD2-GU-(Ex)1 | ENG | 1294 KB | |
System Manual | ENG | 3524 KB | |
Handbuch KFD2-GU-(Ex)1 | GER | 1193 KB | |
Installations- und Konfigurationsanleitung Device Type Manager (DTM) | GER | 8463 KB | |
Systemhandbuch | GER | 3557 KB | |
Instruction manuals | |||
Инструкции | BUL | 69 KB | |
Návod k poużití | CZE | 61 KB | |
Instruktions manual | DAN | 58 KB | |
Instruction manual | ENG | 50 KB | |
Kasutusjuhend | EST | 56 KB | |
Käyttöohje | FIN | 56 KB | |
Manuel d'instructions | FRA | 97 KB | |
Betriebsanleitung | GER | 62 KB | |
Οδηγίες χρήσης | GRE | 73 KB | |
Handleiding | HOL | 72 KB | |
Instruction manual / Betriebsanleitung | HRV | 70 KB | |
Használati útmutató | HUN | 71 KB | |
Manuale di istruzioni | ITA | 93 KB | |
Lietošanas pamācība | LAV | 68 KB | |
Instrukciju vadovas | LIT | 68 KB | |
Instrukcja obsługi | POL | 72 KB | |
Manual de instruções | POR | 72 KB | |
Manual de utilizare | RON | 71 KB | |
Návod na poużitie | SLK | 130 KB | |
Manual de instrucciones | SPA | 95 KB | |
Manual | SWE | 66 KB |
CAD | File Type | File Size | |
---|---|---|---|
3-D model / 3-D-Modell | STP | 2510 KB | |
EPLAN | |||
EPLAN Data Portal / EPLAN Data Portal | LINK | --- | |
EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 63 KB |
Certificates | Certificate No. | File Type | File Size |
---|---|---|---|
Baseefa IECEx Certificate of Conformity | IECEx BAS 06.0022 | LINK | --- |
Canada UL cUL | E106378 cUL (QUZW7) | LINK | --- |
EAC Pepperl+Fuchs EAC TP TC 020/2011 | EAEC N RU D-DE.PA01.B.95500/21 | 748 KB | |
Europe Baseefa ATEX Category (1) GD | BAS 98 ATEX 7152 | 4997 KB | |
India PESO (India) CCOE | A/P/HQ/KA/104/5908 (P513787) | 100 KB | |
Russia Belarus Kazakhstan EAC EAC TP TC 012/2011 | EAEC RU C-DE.EX01.B.00102/19 | 9815 KB | |
Russia VNIIMS Pattern Approval | DE.C.32.004.A No.29177 | 3779 KB | |
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378 | CoC 20140902 - E106378 RepRef 20011030 | 429 KB | |
USA UL | E106378 UL (QUZW) | LINK | --- |
Control drawings | |||
Control Drawing UL / Control Drawing UL | 1092 KB |
Device type managers | Release Info | File Type | File Size |
---|---|---|---|
DTM Collection Interface Technology 2 / DTM Collection Interface Technology 2 | 1.4.110.76 | ZIP | 32633 KB |
Software Tools | |||
PACTware 4.1 SP6 / PACTware 4.1 SP6 | 4.1.0.53 | ZIP | 43327 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
This isolated barrier is used for intrinsic safety applications.
The device accepts a variety of inputs including RTDs or thermocouples. The device provides a relay trip whenever it reaches a userprogrammed set point.
The removable terminal block K-CJC-** is available as an accessory for internal cold junction compensation of thermocouples.
A fault is indicated by LEDs acc. to NAMUR NE44 and by user-configured fault indication outputs.
The device is easily configured by the use of the PACTware configuration software.
For additional information, refer to the manual and www.pepperl-fuchs.com.