Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Not available for purchase

This product has been replaced.Go to replacement product HM-PF-USB-010031
Not available for purchase
Not available for purchase

Viator USB HART Interface HM-MT-USB-010031

HM-MT-USB-010031
  • HART compliant for communication with any HART field device and error-free slave testing
  • Draws power from USB port, needs no external supply to power modem
  • Compact, rugged polycarbonate housing for industrial-grade reliability
  • USB 1.1 compliant
  • Integrated connector cable terminates in 2 test clips and 1 USB connector cable
  • Polarity insensitive test clips
  • Compatible with 32- and 64-bit Windows® 7, 8, XP, 10, or Vista

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  HM-MT-USB-010031

Product Description
Interface for commissioning, calibrating, and acquiring data from HART field devices
Supply
Input current30 mA at 5 V
Power supplyPowered by USB port , No external power required
Interface
Interface typeUSB port
Output
Signal0.5 ± 0.1 Vpp trapezoidal wave at 1200/2200 Hz, 24 VDC at 40 mA to device
Galvanic isolation
Output/interface1500 V DC
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013
RoHS
Directive 2011/65/EU (RoHS)EN 50581:2012
System requirements
Operating systemWindows® 98 , 2000 , 32-bit XP , 32-bit Vista , 32- and 64-bit Windows® 7, and Windows® 10
Ambient conditions
Operating temperature-20 ... 50 °C (-4 ... 122 °F)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Relative humidity0 ... 95 % non-condensing
Mechanical specifications
Degree of protectionIP20
ConnectionUSB (type A) Connector , red and black test clips
MaterialPolycarbonate
Dimensions75 mm x 33 mm x 15 mm
Height15 mm
Width33 mm
Length75 mm
Cable length1.8 m 2-strand wire terminating in 2 test clips , 15.2 cm cable terminating in 1 USB type A connector
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027219090
ECLASS 12.027219090
ECLASS 11.027219290
ECLASS 10.0.127219290
ECLASS 9.027219290
ECLASS 8.027219290
ECLASS 5.127242391
ETIM 9.0EC001604
ETIM 8.0EC001604
ETIM 7.0EC001604
ETIM 6.0EC003015
ETIM 5.0EC001467
UNSPSC 12.139121008

Details: HM-MT-USB-010031

Function

The Viator® USB HART Interface provides a flexible PC communication link to HART networks. It is used to commission, service, calibrate, and acquire data from any HART field device or transmitter. The interface is compact and rugged for field use.

Product Documentation: HM-MT-USB-010031

Language Selection:
ManualsLanguageFile TypeFile Size
ManualENGPDF4003 KB

Approvals: HM-MT-USB-010031

Language Selection:
Declaration of ConformityCertificate No.LanguageFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-B0B7AALLPDF86 KB

Software: HM-MT-USB-010031

Language Selection:
Software ToolsRelease InfoFile TypeFile Size
Viator Installer 32 bit (v4.1.0) / Viator Installer 32 bit (v4.1.0)118-0218CZIP11989 KB
Viator Installer 64 bit (v4.1.0) / Viator Installer 64 bit (v4.1.0)118-0219CZIP12002 KB

Associated Products: HM-MT-USB-010031

Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Device DTM, For HART multiplexers, Communication DTMpa