Inductive sensor NBN4-V3-E2-3G-3D
- 4 mm non-flush
- 3-wire DC
- ATEX-/IECEx-approvals for zone 2/22 (Ex ec/tc)
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NBN4-V3-E2-3G-3D
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 4 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 3.24 mm | |
| Reduction factor rAl | 0.35 | |
| Reduction factor rCu | 0.2 | |
| Reduction factor r304 | 0.7 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V DC | |
| Switching frequency | 0 ... 500 Hz | |
| Reverse polarity protection | yes | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 °C | |
| No-load supply current | ≤ 15 mA | |
| Switching state indicator | LED, yellow | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Gc (ec) | IECEx TUR 21.0019X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0020X | |
| ATEX approval | ||
| Equipment protection level Gc (ec) | TÜV 20 ATEX 8525 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8526 X | |
| UL approval | cULus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 130 mm | |
| Core cross section | 0.14 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Cable | ||
| Bending radius | > 10 x cable diameter | |
| Tightening torque, fastening screws | ≤ 0.4 Nm | |
| Dimensions | ||
| Height | 10.2 mm | |
| Width | 27.8 mm | |
| Length | 16 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NBN4-V3-E2-3G-3D
Datasheet: NBN4-V3-E2-3G-3D
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NBN4-V3-E2-3G-3D | 489 KB | |
| Datasheet NBN4-V3-E2-3G-3D | 485 KB | |
| Fiche de données NBN4-V3-E2-3G-3D | 485 KB | |
| Datenblatt NBN4-V3-E2-3G-3D | 486 KB | |
| Scheda tecnica NBN4-V3-E2-3G-3D | 484 KB | |
| Datasheet NBN4-V3-E2-3G-3D | 491 KB | |
| Folha de dados NBN4-V3-E2-3G-3D | 486 KB | |
| Hoja de datos NBN4-V3-E2-3G-3D | 485 KB | |
| Datasheet NBN4-V3-E2-3G-3D | 499 KB |
Documents: NBN4-V3-E2-3G-3D
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 177 KB | |
| Návod k poużití | 170 KB | |
| Instruktions manual | 169 KB | |
| Instruction manual | 170 KB | |
| Kasutusjuhend | 165 KB | |
| Käyttöohje | 164 KB | |
| Manuel d'instructions | 172 KB | |
| Betriebsanleitung | 171 KB | |
| Οδηγίες χρήσης | 181 KB | |
| Handleiding | 169 KB | |
| Instruction manual / Betriebsanleitung | 169 KB | |
| Használati útmutató | 171 KB | |
| Manuale di istruzioni | 170 KB | |
| Lietošanas pamācība | 169 KB | |
| Instrukciju vadovas | 170 KB | |
| Instrukcja obsługi | 172 KB | |
| Manual de instruções | 172 KB | |
| Manual de utilizare | 171 KB | |
| Návod na poużitie | 171 KB | |
| Navodila za uporabo | 168 KB | |
| Manual de instrucciones | 172 KB | |
| Manual | 167 KB |
CAD+CAE: NBN4-V3-E2-3G-3D
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 82 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 66 KB |
Approvals+Certificates: NBN4-V3-E2-3G-3D
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.