Purchase on Account
* Pepperl+Fuchs makes every effort to provide an answer that is helpful and relevant to you. Your question is typically answered in one business day. Occasionally, an answer is delayed. In these cases, we are often researching your question, conferring with colleagues, or may route your question to another Pepperl+Fuchs location. You will be notified via e-mail regarding the status of your question.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Switching function||Normally open (NO)|
|Rated operating distance||2 mm|
|Reduction factor rAl||0.5|
|Reduction factor rCu||0.46|
|Reduction factor r304||0.9|
|Reduction factor rSt37||1|
|Reduction factor rBrass||0.8|
|Operating voltage DC||10 ... 140 V|
|Operating voltage AC||20 ... 140 V|
|Switching frequency||25 Hz|
|Reverse polarity protection||no|
|Voltage drop||≤ 7 V|
|Operating current||5 ... 200 mA max|
|Off-state current||≤ 0.8 mA|
|Switching state indicator||LED, red|
|Compliance with standards and directives|
IEC 60947-5-2 AMD 1:2012
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Connection type||cable PUR , 2 m|
|Core cross-section||0.25 mm2|
|Degree of protection||IP67|
|Technical information||Language||File Type||File Size|
|Installation conditions||ENG||133 KB|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-3477A||1255 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.