Purchase on Account
* Pepperl+Fuchs makes every effort to provide an answer that is helpful and relevant to you. Your question is typically answered in one business day. Occasionally, an answer is delayed. In these cases, we are often researching your question, conferring with colleagues, or may route your question to another Pepperl+Fuchs location. You will be notified via e-mail regarding the status of your question.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Switching function||Normally open (NO)|
|Rated operating distance||2 mm|
Note: Sensor can be recessed 0.5 mm in steel with no effect on the sensing field.
|Assured operating distance||0 ... 1.62 mm|
|Actuating element||Ferrous targets|
|Reduction factor rAl||0|
|Reduction factor rCu||0|
|Reduction factor r304||0.6 - 0.8|
|Reduction factor rBrass||0|
|Operating voltage||10 ... 30 V DC|
|Switching frequency||80 Hz|
|Hysteresis||typ. 5 %|
|Reverse polarity protection||reverse polarity protected|
|Voltage drop||≤ 2 V|
|Operating current||≤ 200 mA|
|Current consumption||≤ 22 mA|
|Off-state current||≤ 10 µA|
|No-load supply current||≤ 15 mA|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|Operation indicator||Dual LED
|Compliance with standards and directives|
|Approvals and certificates|
|CCC approval||CCC approval / marking not required for products rated ≤36 V|
|Ambient temperature||-10 ... 70 °C (14 ... 158 °F)|
|Shock resistance||30 g 11 ms 3 planes|
|Connection type||150 mm POC cable with 3-pin ( gold-plated ) M12 x 1 connector|
|Core cross section||3 x 0.14 mm2|
|Housing material||Xylan coated - Stainless steel 1.4305 / AISI 303|
|Sensing face||Xylan coated - Stainless steel 1.4305 / AISI 303|
|Degree of protection||IP67|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-4304A||1218 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.