Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Capacitive sensor CJ40-FP-A2-P1

CJ40-FP-A2-P1
  • 40 mm non-flush
  • 4-wire DC
  • The switching distance can be set over a wide range with the potentiometer

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  CJ40-FP-A2-P1

General specifications
Switching functioncomplementary
Output typePNP
Rated operating distance40 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 32.4 mm
Output type4-wire
Nominal ratings
Installation conditions
B40 mm
C80 mm
F120 mm
Operating voltage10 ... 60 V DC
Switching frequency0 ... 10 Hz
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2.8 V
Operating current0 ... 200 mA
No-load supply current≤ 20 mA
Switching state indicatorLED, yellow
Indicators/operating means
Potentiometersensitivity adjustment
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typescrew terminals
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPBT/POM
Sensing facePOM
Housing basePBT
Degree of protectionIP65

Classifications

SystemClasscode
ECLASS 11.027270102
ECLASS 10.0.127270102
ECLASS 9.027270102
ECLASS 8.027270102
ECLASS 5.127270102
ETIM 8.0EC002715
ETIM 7.0EC002715
ETIM 6.0EC002715
ETIM 5.0EC002715
UNSPSC 12.139121550

Documents: CJ40-FP-A2-P1

Technical informationLanguageFile TypeFile Size
Installation conditionsENGPDF219 KB
EinbaubedingungenGERPDF345 KB

CAD+CAE: CJ40-FP-A2-P1

CADFile TypeFile Size
3-D model / 3-D-ModellSTP106 KB
CAD Portal / CAD PortalLINK---
EPLAN
EPLAN Data Portal / EPLAN Data PortalLINK---
EPLAN macro EDZ / EPLAN Makro EDZEDZ69 KB

Approvals+Certificates: CJ40-FP-A2-P1

CertificatesCertificate No.File TypeFile Size
Canada USA UL Ordinary Location20170306-E87056PDF407 KB