Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Capacitive sensor CCB10-30GS55-N1

  • 10 mm flush
  • The switching distance can be set over a wide range with the potentiometer

NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

 in stock
185.00 USDUnit Price 


Free Shipping

Purchase on Account

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  CCB10-30GS55-N1

General specifications
Switching functionNormally open (NO)
Output typeNAMUR
Rated operating distance10 mm
Output type2-wire
Nominal ratings
Installation conditions
A0 mm
B0 mm
C20 mm
F60 mm
Nominal voltage8.2 V (Ri approx. 1 kΩ)
Operating voltage5 ... 15 V
Switching frequency0 ... 50 Hz
Reverse polarity protectionreverse polarity protected
Current consumption
Measuring plate not detected≤ 1.5 mA
Measuring plate detected≥ 2.5 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1134 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
ETL approvalcETLus
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.75 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePTFE
Degree of protectionIP67
Equipment protection level Ga
CE marking[*PD-Z02585A*]
ATEX markingEx-Hexagon II 1G Ex ia IIC T1-T6 Ga
StandardsEN 60079-0:2012, EN 60079-11:2012, EN 60079-26:2007
Ignition protection "Intrinsic safety"
Appropriate typeCCB10-30GS55-N1...
Effective internal capacitancemax. 250 nF
Effective internal inductancemax. 200 µH
Highest permissible ambient temperature
T6 when Pi = 100 mW, Ui = 15 V, Ii =30 mA40 °C (104 °F)
T5 when Pi = 100 mW, Ui = 15 V, li = 30 mA40 °C (104 °F)
T4 when Pi = 100 mW, Ui = 15 V, Ii = 30 mA80 °C (176 °F)
T3, T2, T1 when Pi = 100 mW, Ui = 15 V, Ii = 30 mA100 °C (212 °F)
Equipment protection level Da
CE marking[*PD-Z02585A*]
ATEX markingEx-Hexagon II 1D Ex ia IIIC T101°C Da
StandardsEN 60079-0:2012; EN 60079-11:2012
type of protection intrinsic safety "ia"
Appropriate typeCCB10-30GS55-N1...
Effective internal capacitancemax. 250 nF
Effective internal inductancemax. 200 µH
General information
Use in the hazardous areasee instruction manuals
Category1G; 1D

Documents: CCB10-30GS55-N1

Instruction manualsLanguageFile TypeFile Size
Instruction manualENGPDF52 KB
Manuel d'instructionsFRAPDF54 KB
BetriebsanleitungGERPDF55 KB
Manuale di istruzioniITAPDF50 KB
Manual de instruccionesSPAPDF53 KB

Approvals+Certificates: CCB10-30GS55-N1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0353APDF347 KB

Associated Products: CCB10-30GS55-N1


11.00  USD

In stock

Mounting flange, 30 mmfa