Multifunction Terminal MFT-2L.1600

Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies
Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches
Bus termination
Current limiting
DIN rail mounting
Maintenance without hot work permit
Wires can be disconnected during operation once the module has been removed
(parts under voltage remain covered)

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of MFT-2L.1600

Product Description
Multifunction terminal, 4-pin, 2 x bridges

General specifications
Function		The specific device function can be found in the ordering information section.
Electrical specifications
Resistor		1 x 1 Ω ... 22 MΩ, 0.5 W 2 x 1 Ω ... 22 MΩ, 0.5 W
Diode		1 x I max. 1 A 2 x I max. 0.5 A
Fuse		0.032 ... 1.5 A 1.5 ... 6.3 A Pre-arcing time/current characteristic: time-lag T
	Nominal voltage	max. 250 V AC max. 30 V DC
Relay
	Control	24 V , approx. 5 ... 8.5 mA
	Contact loading	AC max. 250 V , max. 1 A DC max. 30 V , max. 1 A
	Contact resistance	0.1 Ω at 6 V, 1 A
	Switching operations NO contact	3 x 10⁴
	Switching operations NC contact	1 x 10⁴
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-55 ... 70 °C (-67 ... 158 °F)
Mechanical specifications
Core cross section		0.5 ... 2.5 mm²
Degree of protection		IP20 , IP30 when plug-in module is plugged in
Mass		approx. 115 g , depending on model
Dimensions		93 x 17.5 x 79 mm (l x w x h)
Tightening torque		0.5 ... 1 Nm
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 07 ATEX 1004 U
	Marking	II 2 G Ex d e IIC
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-1:2014 , EN 60079-7:2015+A1:2018
International approvals
IECEx approval
	IECEx certificate	IECEx BKI 08.0008U
	IECEx marking	Ex d e IIC Gb
Marine approval
	DNV GL Marine	TAA0000034
General information
Ordering information		Customer-specific values are available in the E96 series. Minimum order quantity 50 pieces.
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210192
ECLASS 12.0	27210192
ECLASS 11.0	27210192
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27242692
ETIM 9.0	EC003015
ETIM 8.0	EC003015
ETIM 7.0	EC003015
ETIM 6.0	EC003015
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: MFT-2L.1600

Function

The multifunction terminal allows maintenance without a hot work permit in a hazardous area.

It employs a 2-step removal process, which guarantees that a potentially formed ignition spark remains inside the flameproof enclosure when lifting off a module and thus makes sure that the ignition spark has extinguished and the module is volt-free.

Product Documentation: MFT-2L.1600

Safety and Security Documentation	Language	File Type	File Size
Instruction manual	ENG	PDF	166 KB
Manuals
Manual	ENG	PDF	2766 KB

Design / Simulation: MFT-2L.1600

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	2318 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	41 KB
EPLAN macros MFT / EPLAN-Makros MFT	ALL	ZIP	11723 KB

Approvals: MFT-2L.1600

Certificates	Certificate No.	Language	File Type	File Size
BKI IECEx Certificate of Conformity	IECEx BKI 08.0008U	ALL	LINK	---
Brasil TUV Rheinland Brazil	TÜV 13.1133 U	ALL	PDF	1220 KB
Bureau Veritas (Maritime) Marine	22449/C0 BV	ALL	PDF	590 KB
DNV Marine	TAA0000034	ALL	PDF	110 KB
Europe PTB ATEX Category 2 G	PTB 07 ATEX 1004U	ALL	PDF	1206 KB
Lloyd's Register Marine	LR2003616TA-02	ALL	PDF	557 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0746D	ALL	PDF	358 KB

Associated Products: MFT-2L.1600

Accessory of

	R4D0-FB-IA* FieldBarrier® for Cabinet Installation	Contact Us
	FieldConnex® FieldBarrier®, 8 ... 12 outputs Ex ia IIC, FISCO and Entity, Advanced fault isolation and diagnostics at the spur, FieldBarrier in Zone 1/Div. 2, Instruments in Zone 0...1/Div. 1, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, Dust protection, International, Europe, USA, Device coupler location: Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

Accessories

	MFT-BASE.4P Multifunction Terminal	Contact Us
	pa

Specifications

	MFT-* Multifunction Terminal	Contact Us
	Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies, Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches , Bus termination, Current limiting, DIN rail mounting, Maintenance without hot work permit, Wires can be disconnected during operation once the module has been removed (parts under voltage remain covered)pa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.