Remote I/O Systems

Not available for purchase

Field Unit FB9248-S70-0-0-0-0-0

Standard enclosure for FB-System
Max. 48 slots for I/O modules
For PROFIBUS DP, PROFIBUS DP V1 and MODBUS RTU
Electropolished enclosure, IP66/NEMA 4X
Packaged certified solution
Installation in Zone 1

Technical Data
Details
Product Documentation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of FB9248-S70-0-0-0-0-0

Product Description
Field Unit, Stainless Steel

Slots
Bus coupler		1
Bus termination		1
Supply		2
I/O modules (single width)		max. 48
I/O modules (dual width)		max. 24
Supply
Connection		screw terminals, max. 10 mm²
Rated voltage		24 V DC/115 V AC/230 V AC , depends on power supply
Redundancy		no
Fieldbus connection
Fieldbus type		PROFIBUS DP/DP-V1 or MODBUS RTU , depends on bus coupler
Connection		spring terminal, max. 2.5 mm²
Redundancy		no
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1
Conformity
Degree of protection		EN 60529
Impact resistance		EN 60079-0
Ambient conditions
Ambient temperature		-20 ... 40 °C (-4 ... 104 °F) higher temperature range possible by individual assessment of the module assembly
Storage temperature		-25 ... 70 °C (-13 ... 158 °F)
Relative humidity		< 75 % (annual mean) < 95 % (30 d/year), no moisture condensation
Shock resistance		shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistance		frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Impact resistance		7J
Mechanical specifications
Enclosure cover		hinged door with cam lock and double-bit insert
Degree of protection		IP66, NEMA 4X
Cable entry		power supply (Ex e): 2 x M25 and 2 x stopping plugs bus (Ex e): 4 x M20 and 2 x stopping plugs field signals (Ex i): 192 x M16
Material
	Housing	Stainless steel 1.4404 / AISI 316L
	Surface	electropolished
	Cable gland	Polyamide (PA)
	Seal	enclosure cover: polyurethane gland plate: polymer (CR) cable gland: neoprene
	Material thickness	enclosure body: 1.2 mm enclosure cover: 1.5 mm gland plate: 3 mm mounting base: 3 mm
Mass		approx. 45 kg , without modules
Dimensions		(W x H x D) 800 x 800 x 300 mm (31.5 x 31.5 x 11.8 inch)
	Height	800 mm
	Width	800 mm
	Depth	300 mm
Mounting		thru-holes Ø11 mm
Grounding		grounding bolt M10 , brass
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 97 ATEX 1075 X
	Marking	II 2(1)G Ex d e mb [ia Ga/ib] IIC T4 Gb II 2(1)D Ex tb [ia Da/ib] IIIC T130°C Db
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-1:2007 , EN 60079-7:2007 , EN 60079-11:2012 , EN 60079-18:2009 , EN 60079-31:2014
International approvals
INMETRO approval		TÜV 13.1140
Marine approval
	Lloyd Register	15/20021
	DNV GL Marine	TAA0000034
	American Bureau of Shipping	T1450280/UN
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210190
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27242692
ETIM 9.0	EC000200
ETIM 8.0	EC000200
ETIM 7.0	EC000200
ETIM 6.0	EC000200
ETIM 5.0	EC000200
UNSPSC 12.1	39121008

Details: FB9248-S70-0-0-0-0-0

Function

This field unit is designed to meet the requirements of the most demanding hazardous area and industrial environmental applications.

Electropolished stainless steel 316L provides high corrosion and impact resistance at a very wide temperature range. The integrated rain channel prevents standing water from damaging the one-piece seal.

It is equipped with plug-in slots for 24 dual width I/O modules or 48 single width I/O modules.

Any I/O module can be inserted into any slot, enabling a mixture of I/O types in one field unit.

Product Documentation: FB9248-S70-0-0-0-0-0

Manuals	Language	File Type	File Size
FB Hardware Manual	ENG	PDF	9157 KB

Approvals: FB9248-S70-0-0-0-0-0

Certificates	Certificate No.	Language	File Type	File Size
DNV Marine	TAA0000034	ALL	PDF	110 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2430C	ALL	PDF	101 KB

Associated Products: FB9248-S70-0-0-0-0-0

Accessory of

	FB4202B2 HART Output Isolator	Contact Us
	1-channel, Output Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB4204B2 Output Isolator	Contact Us
	4-channel, Fully compatible replacement for FB4204B, Outputs Ex ia, Installation in suitable enclosures in Zone 1, Explosion protection: Ex ia, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB4205B2 HART Output Isolator	Contact Us
	4-channel, Outputs Ex ia, Module can be exchanged under voltage (hot swap), Installation in suitable enclosures in Zone 1, Explosion protection: Ex ia, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB4205C2 HART Output Isolator with Shutdown Input	Contact Us
	4-channel, Outputs Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, SIL/IEC 61508, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB4302B2 HART Output Isolator	Contact Us
	1-channel, Outputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB6306B2 Relay output	Contact Us
	8-channel, Outputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connectionpa

	FB6308B2 Digital Output with Shutdown Input	Contact Us
	8-channel, Outputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Field device: Solenoid Valve, Field device [2]: audible alarm, Field device [3]: visual alarmpa

	FB1303B2 Frequency / Counter Input	Contact Us
	1-channel, Inputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Function: Counter , Function [2]: frequency, Function [3]: direction of rotation, Connection: NAMUR sensor, Connection [2]: volt-free contactpa

	FB1308B2 Digital Input	Contact Us
	8-channel, Inputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Connection: NAMUR sensor, Connection [2]: volt-free contact, Connection [3]: active binary signal 24 V DCpa

	FB3205B3 HART Transmitter Power Supply, Input Isolator	Contact Us
	4-channel, Inputs Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, Connection [2]: 3-wire transmitter, Connection [3]: 4-wire transmitter, HART communicationpa

	FB1308B3 Digital Input	Contact Us
	8-channel, Inputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Connection: NAMUR sensor, Connection [2]: volt-free contact, Connection [3]: active binary signal 24 V DCpa

	FB3204B2 Transmitter Power Supply, Input Isolator	Contact Us
	4-channel, Inputs Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, Connection [2]: 3-wire transmitter, Connection [3]: 4-wire transmitterpa

	FB3205B2 HART Transmitter Power Supply, Input Isolator	Contact Us
	4-channel, Inputs Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, Connection [2]: 3-wire transmitter, Connection [3]: 4-wire transmitter, HART communicationpa

	FB3305B2 HART Transmitter Power Supply, Input Isolator	Contact Us
	4-channel, Inputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, Connection [2]: 3-wire transmitter, Connection [3]: 4-wire transmitter, HART communicationpa

	FB4202B3 HART Output Isolator	Contact Us
	1-channel, Output Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB3202B1 HART Transmitter Power Supply, Input Isolator	Contact Us
	1-channel, Input Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, HART communicationpa

	FB4205B3 HART Output Isolator	Contact Us
	4-channel, Outputs Ex ia, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: Proportional Valve, Field device [2]: I/P converters, Field device [3]: on-site displaypa

	FB3202B2 HART Transmitter Power Supply, Input Isolator	Contact Us
	1-channel, Input Ex ia, Power supply for 2- or 3-wire transmitters with 4 mA ... 20 mA, Module can be exchanged under voltage (hot swap), Explosion protection: Ex ia, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, Connection [2]: 3-wire transmitter, Connection [3]: 4-wire transmitter, HART communicationpa

	FB3302B2 HART Transmitter Power Supply, Input Isolator	Contact Us
	1-channel, Inputs with plug-in Ex e terminals, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Explosion protection: Ex e connection, Field device: pressure converter, Field device [2]: flow converter, Field device [3]: level converter, Field device [4]: Temperature Converter, Connection: 2-wire transmitter, Connection [2]: 3-wire transmitter, Connection [3]: 4-wire transmitter, HART communicationpa

	FB1301B2 Digital Input	Contact Us
	2-channel, Inputs with plug-in Ex e terminals, Module can be exchanged under voltage (hot swap), Installation in suitable enclosures in Zone 1, Explosion protection: Ex e connection, Connection: NAMUR sensor, Connection [2]: volt-free contact, Connection [3]: active binary signal 24 V DCpa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.