Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Pressurization System 10E-*

  • Environmental purge for nonhazardous areas
  • Built in ISO 9001 registered manufacturing facilities
  • Complete package for enclosures up to 7.2 m3 (250 ft3)

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  10E-*

Product Description
Environmental purge for nonhazardous dusty/dirty areas
General specifications
Electrical specifications
ConnectionTerminal blocks
Output I-WGS-
Output typeSwitch contacts
Contact loading15 A @ 120 - 480 VAC, 60 Hz resistive load; 1/8 HP @ 125 VAC
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement5 ... 120 psi (.34 ... 8.3 bar) (34 ... 827 kPa)
Enclosure pressure0.5" wc (12.5 mm wc) (1.25 mbar) (125 Pa)
Flow rate for leakage compensation0.1 ... 3.5 SCFH (2.83 ... 99.12 l/hr)
Ambient conditions
Ambient temperature-28.9 ... 48.9 °C (-20 ... 120 °F)
Mechanical specifications
Connection typeSystem supply fitting: GBC-6, 3/8 inch bulkhead fitting
System supply tubing: 3/8 inch nylon or Polyethylene tubing
Reference fitting: GBC-4, 1/4 inch bulkhead fitting
Reference tubing: 1/4 inch nylon or Polyethylene tubing
MaterialRegulator body: zinc w/enamel finish
Regulator handle: polycarbonate
Enclosure pressure gauge: aluminum w/enamel finish
Tube fittings, GBC-: nickel plated brass
Tubing: nylon or polyethylene
Fastener hardware: aluminum & stainless steel
Mounting plate: 316L, 14 ga. stainless steel
Mass10E-WGS-WRR-_: 4.54 kg (10 lb)
10E-LGS-WRR-_: 3.18 kg (7 lb)
10E-WGS-WVT-_: 6.35 kg (14 lb)
10E-LGS-WVT-_: 4.99 kg (11 lb)


ECLASS 13.027180508
ECLASS 12.027180508
ECLASS 11.027180508
ECLASS 10.0.127180508
ECLASS 9.027180508
ECLASS 8.027180508
ECLASS 5.140050501
ETIM 9.0EC000243
ETIM 8.0EC000243
ETIM 7.0EC000243
ETIM 6.0EC000243
ETIM 5.0EC000243
UNSPSC 12.139121301

Details: 10E-*


The Enviro-Line series is an environmental pressurization system designed for nonhazardous areas that contain dusty, dirty, and corrosive atmospheres. It operates on a supply of compressed instrument air or inert gas to regulate and monitor the pressure within the sealed enclosure.

The system maintains a constant 0.5" water pressure inside the enclosure. As a result, corrosive elements remain outside the enclosure.

The Enviro-Line offers a complete environmental pressurization system including a regulator or vent, depending on your application. It is designed for enclosures up to 7.2 m3 (250 ft3).

An Enviro-Line pressurization system includes a stainless steel panel, adaptable mounting plate, enclosure pressure gauge, tubing, fittings, and fastening hardware. A complete kit down to the nuts and bolts.

Product Documentation: 10E-*

Language Selection:
ManualsLanguageFile TypeFile Size
Enviro-Line Environmental Pressurization System ManualENGPDF1489 KB

Approvals: 10E-*

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
UL Hazardous LocationE184741 (RFPW, RFPW7)ALLPDF193 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-B074ALLPDF142 KB

Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!