Serviceline
Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Read/write head IQH1-18GM-V1

IQH1-18GM-V1
  • Operating frequency 13.56 MHz
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • Read/write head with thread M18 x 1
  • Connection via V1 (M12 x 1) plug connection
  • Multihole-LED for function display
  • Degree of protection IP67
  • For connection to IDENTControl control interface
Unit Price:  730.00  USD
 Please contact the Serviceline for exact delivery estimation

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of IQH1-18GM-V1

Product Description
HF read/write head, ISO 15693, for IDENTControl
General specifications
Operating frequency13.56 MHz
Transfer rate26 kBit/s
Sensing range
Read distance0 ... 55 mm
Write distance0 ... 55 mm
Widthmax. 45 mm
UL File NumberE87056 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source
Indicators/operating means
LED green/yellowMultihole-LED:
green: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Electrical specifications
Power consumption≤ 1.2 W
Supplyfrom the IDENTControl
Compliance with standards and directives
Directive conformity
R&TTE Directive 1995/5/ECEN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08), EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006
Standard conformity
Electromagnetic compatibilityEN 61000-6-2:2006 , EN 61000-6-4:2007
Degree of protectionEN 60529:2000
RFIDISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3:2008
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
KCC approvalKCC-CRI-PF1-IQH1-18GM-V1
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67
ConnectionM12 x 1 connector
Material
HousingPBT/stainless steel
Encapsulation compoundCY 221/HY 2966
Installationnon-flush
Distance between two headsMultiplex on: ≥ 30 mm
Multiplex off: ≥ 80 mm
Massapprox. 40 g

Documents: IQH1-18GM-V1

ManualsLanguageFile TypeFile Size
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB
Handbuch Schreib- und Leseabstände und Vorbeifahrgeschwindigkeiten RFIDGERPDF3642 KB
Instructions, short instructions, safety information
Simplified EU Declaration of Conformity / Vereinfachte EU-KonformitätserklärungALLPDF75 KB

Approvals+Certificates: IQH1-18GM-V1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-1864APDF162 KB
Certificates
Australia Pepperl+Fuchs Radio ApprovalACMA Supplier's declaration of conformityPDF73 KB
Japan Radio ApprovalCERT-3127PDF243 KB
Korea Radio ApprovalKCC-CRI-PF1-IQH1-18GM-V1PDF408 KB
Russia TUV GOST-R101-KC/542PDF90 KB
Taiwan Radio ApprovalCCAM15LP0280T3PDF132 KB
US CA ULE87056LINK---
USA FCC ApprovalIREIQH1-18GM-V1PDF64 KB

Associated Products: IQH1-18GM-V1

Accessories

Data carrierfa
33.00  USD

In stock

Data carrierfa
43.00  USD

In stock

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa
55.00  USD

In stock

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa
Data carrierfa
Data carrierfa
Data carrierfa
10.00  USD

Contact Us

Data carrierfa
Data carrierfa
Visit the RFID Hub

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …