Fieldbus Power Hub, Basic Diagnostic Module HD2-DM-B
- Basic monitoring for power supply output and health
- Plug-in Module for the FieldConnex Power Hub
- Plug and play - no engineering required
- For online monitoring
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Installation in Zone 2/Class I, Div. 2
- System state and fault indication via LEDs
Contact UsPlease note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of HD2-DM-B
| General specifications | ||
|---|---|---|
| Design / Mounting | Motherboard based | |
| Supply | ||
| Rated voltage | 19.2 ... 35 V | |
| Rated current | 20 mA | |
| Power dissipation | max. 0.5 W | |
| Indicators/operating means | ||
| LED PRI PWR | green: on, primary bulk power supply connected | |
| LED SEC PWR | green: on, secondary bulk power supply connected | |
| LED ERR | red: 2 Hz flashing, power supply fault (short-circuit, undervoltage), redundancy fault | |
| Fault signal | VFC alarm 1 A, 50 V DC, normally closed | |
| Galvanic isolation | ||
| Fieldbus segment/Fieldbus segment | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 95 % non-condensing | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Pollution degree | max. 2, according to IEC 60664 | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Connection type | motherboard specific | |
| Core cross-section | motherboard specific | |
| Housing material | Polycarbonate | |
| Housing width | 18 mm | |
| Housing height | 106 mm | |
| Housing depth | 128 mm | |
| Degree of protection | IP20 | |
| Mass | approx. 70 g | |
| Mounting | motherboard mounting | |
| Data for application in connection with hazardous areas | ||
| Certificate | TÜV 04 ATEX 2500 X | |
| Marking |  II 3 G Ex nA nC IIC T4 Gc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| FM approval | ||
| FM certificate | FM 19 US 0015 X and FM 19 CA 0011 X | |
| FM marking | AEx/Ex nA nC IIC T4 | |
| IECEx approval | ||
| IECEx certificate | IECEx TUN 13.0038X | |
| IECEx marking | Ex nA IIC T4 Gc | |
| Certificates and approvals | ||
| Marine approval | DNV A-14038 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27242692 |
| ECLASS 10.0.1 | 27242692 |
| ECLASS 9.0 | 27242692 |
| ECLASS 8.0 | 27242692 |
| ECLASS 5.1 | 27242692 |
| ETIM 8.0 | EC001604 |
| ETIM 7.0 | EC001604 |
| ETIM 6.0 | EC001604 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Documents: HD2-DM-B
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual | ENG | 3044 KB | |
| Manual Basic Diagnostics HD2-DM-B | ENG | 970 KB | |
| Instruction manuals | |||
| Инструкции | BUL | 193 KB | |
| Návod k poużití | CZE | 0 KB | |
| Instruktions manual | DAN | 127 KB | |
| Instruction manual | ENG | 63 KB | |
| Kasutusjuhend | EST | 184 KB | |
| Käyttöohje | FIN | 184 KB | |
| Manuel d'instructions | FRA | 127 KB | |
| Betriebsanleitung | GER | 65 KB | |
| Οδηγίες χρήσης | GRE | 0 KB | |
| Handleiding | HOL | 187 KB | |
| Instruction manual / Betriebsanleitung | HRV | 187 KB | |
| Használati útmutató | HUN | 189 KB | |
| Manuale di istruzioni | ITA | 124 KB | |
| Instrukcja obsługi | POL | 0 KB | |
| Manual de instruções | POR | 188 KB | |
| Manual de utilizare | RON | 0 KB | |
| Návod na poużitie | SLK | 188 KB | |
| Navodila za uporabo | SLV | 186 KB | |
| Manual de instrucciones | SPA | 125 KB | |
| Manual | SWE | 186 KB | |
Approvals+Certificates: HD2-DM-B
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-0756B | 89 KB | |
| Certificates | |||
| Brasil TUV Rheinland Brazil | TÜV 13.1135X | 1359 KB | |
| Canada FM | FM 19 CA 0011X | 356 KB | |
| DNV GL Marine | TAA0000272 | 78 KB | |
| EAC Lenpromexpertiza (LPE) EAC TP TC 012/2011 | EAEC RU C-DE.AA71.B.00037/19 | 2835 KB | |
| Europe TUV Nord ATEX Category 3 G | TÜV 04 ATEX 2500X | 1498 KB | |
| India PESO (India) CCOE | A/P/HQ/KA/104/5874 (P507650) | 101 KB | |
| Russia Belarus Kazakhstan EAC EAC TP TC 020/2011 EMC | EAEC N RU D-DE.EA11.B.00318 | 2892 KB | |
| USA FM | FM 19 US 0015X | 213 KB | |
| Worldwide TUV Nord Ex nA nC IECEx nA | IECEx TUN 13.0038X | LINK | --- |
Associated Products: HD2-DM-B
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
| Matching System Components | ||||||
|
||||||
Function: HD2-DM-B
Designed as a plug-in module for the FieldConnex® Power Hub, the Basic Diagnostic Module HD2-DM-B provides basic system diagnostics. It checks for proper operation of bulk power supplies and monitors the connected trunks for overload or short-circuit conditions. All Power Hub modules are checked for proper function. On redundant power modules it indicates missmatching pairs.
The module indicates a fault condition via voltage-free contact. It provides monitoring "plug-and-play" without additional engineering. LED signals indicate a fault for easy detection.
- Ask an Expert
- Cross Reference Request
- Check order status
- News
- NetPartner Login
- Subscribe to Gate-Way, our Process Automation Division e-newsletter
- Service Level Agreements for ecom instruments
- Find a Local Distributor or Representative
- Literature
- Technologies
- Control System Solutions
- Download Technical Documents
- Press Releases
- International Trade Shows
Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …
From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …
The Quick Select Product Guide for interface technology, FieldConnex®, and remote I/O connection technologies will help you select the right technology and systems when designing plants.
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.