Fieldbus Power Hub, Compact Power Supply Module HCD2-FBPS-1.500

Output: 28 ... 30 V/500 mA
High-power trunk for high device count and long cable lengths
With galvanic isolation
Installation in Zone 2/Class I, Div. 2
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Highest efficiency, lowest heat dissipation for highest packing density
Hot swappable in redundant configuration
Module exchange without tools during operation

Technical Data
Details
Informative Literature
Product Documentation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of HCD2-FBPS-1.500

General specifications
Design / Mounting		Motherboard based
Supply
Rated voltage		19.2 ... 35 V DC
Power dissipation		typ. 1.6 W
Fieldbus connection
Rated voltage		28 ... 29.5 V
Rated current		500 ... 10 mA
Short-circuit current		550 mA
Terminating resistor		motherboard specific
Indicators/operating means
LED ERR		red flashing: short-circuit or undervoltage at output
LED PWR		green if U_out > 28 V
Galvanic isolation
Fieldbus segment/Supply		functional insulation acc. to IEC 62103, rated insulation voltage 250 V AC
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Pollution degree		max. 2, according to IEC 60664
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		motherboard specific
Core cross section		motherboard specific
Housing material		Polycarbonate
Housing width		12.5 mm
Housing height		106 mm
Housing depth		128 mm
Degree of protection		IP20
Mass		approx. 150 g
Mounting		motherboard mounting
Data for application in connection with hazardous areas
Outputs
	Voltage	30 V
Certificate		TÜV 10 ATEX 555761X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	FM certificate	FM 19 US 0015 X and FM 19 CA 0011 X
	FM marking	AEx/Ex ec IIC T4
IECEx approval
	IECEx certificate	IECEx TUN 13.0037X
	IECEx marking	Ex ec IIC T4 Gc
Certificates and approvals
Marine approval		DNV A-14038
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242611
ECLASS 12.0	27242611
ECLASS 11.0	27242611
ECLASS 10.0.1	27242611
ECLASS 9.0	27242611
ECLASS 8.0	27242611
ECLASS 5.1	27242611
ETIM 9.0	EC002583
ETIM 8.0	EC002583
ETIM 7.0	EC002583
ETIM 6.0	EC002583
ETIM 5.0	EC001604
UNSPSC 12.1	39121004

Details: HCD2-FBPS-1.500

Function

This Power Supply Module is a system component for the FieldConnex ^® Power Hub and can be plugged into the motherboard. It adapts current and voltage for the supply of fieldbus segments and field devices.

This power supply features the highest output power and allows for maximum cable lengths and highest number of devices in hazardous areas with the High-Power Trunk concept.

Reliability of communication is enhanced through galvanic isolation between segment and bulk power supply. Two LEDs indicate power and status. In redundant configuration two modules are connected in parallel via simple circuits ensuring seamless operation.

Informative Literature: HCD2-FBPS-1.500

Literature	Language	File Type	File Size
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB
Application Report - Fieldbus Power Supply Compatible with Process Industry Applications	ENG	PDF	229 KB

Product Documentation: HCD2-FBPS-1.500

System Descriptions	Language	File Type	File Size
Conformity matrix for R2-SP-IC* and F2-SP-IC* with motherboards: MBHC, FBTA-228-BPFB-R-8R and power supply modules: HCD2-FBPS-	ENG	PDF	143 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	236 KB

Approvals: HCD2-FBPS-1.500

Certificates	Certificate No.	Language	File Type	File Size
Canada FM	FM 19 CA 0011X	ALL	PDF	356 KB
China SITIIAS CCC Ex Certificate	2020322303003509 (Singapore)	ALL	PDF	1406 KB
DNV GL Marine	TAA0000272	ALL	PDF	78 KB
Europe TUV Nord ATEX Category 3 G	TÜV 10 ATEX 555761X	ALL	PDF	2296 KB
TUV Nord IECEx ec Certificate of Conformity	IECEx TUN 13.0037X	ALL	LINK	---
USA FM	FM 19 US 0015X	ALL	PDF	213 KB
Worldwide Fieldbus Foundation	PS066300	ALL	PDF	31 KB
Declaration of Conformity
EU-Declaration of conformity / EU-Konformitätserklärung	DOC-2674B	ALL	PDF	1039 KB

Associated Products: HCD2-FBPS-1.500

Matching System Components

	FBTA-228-BPFB-R-8R Compact Fieldbus Power Hub Motherboard for Invensys FBM 228	Contact Us
	8 segments, redundant, individual modules per segment, Customized for Invensys, FBM228, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	MBHC-FB-4* Compact Fieldbus Power Hub Motherboard with Common Interface	Contact Us
	4 segments, individual modules per segment, Supports all PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	MBHC-FB-4.GT* Fieldbus Power Hub, Motherboard for Gateway and Power Supply Modules	Contact Us
	4 segments, simplex, individual modules per segment, For PROFIBUS PA, For gateway and power supply modules, High-power trunk: Live work on devices in any hazardous area, Optional advanced diagnostics, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	MBHC-FB-4.HSC* Compact Fieldbus Power Hub Motherboard with Host System Connectors	Contact Us
	4 segments, individual modules per segment, Customizable cable connections to any PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4R* Compact Fieldbus Power Hub Motherboard with Common Interface	Contact Us
	4 segments, redundant, individual modules per segment, Supports all PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4R.HSC* Compact Fieldbus Power Hub Motherboard with Host System Connectors	Contact Us
	4 segments, redundant, individual modules per segment, Customizable cable connections to any PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4R.YO* Compact Fieldbus Power Hub Motherboard for Yokogawa ALF111	Contact Us
	4 segments, redundant, individual modules per segment, Customized for Yokogawa, ALF 111, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4.YO* Compact Fieldbus Power Hub Motherboard for Yokogawa ALF111	Contact Us
	4 segments, individual modules per segment, Customized for Yokogawa, ALF 111, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	MBHC-FB-8R* Compact Fieldbus Power Hub Motherboard with Common Interface	Contact Us
	8 segments, redundant, individual modules per segment, Supports all PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-8R.HSC* Compact Fieldbus Power Hub Motherboard with Host System Connectors	Contact Us
	8 segments, redundant, individual modules per segment, Supports all PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-8R.RH* Compact Fieldbus Power Hub Motherboard with Redundant Host Terminals	Contact Us
	8 segments, redundant, individual modules per segment, Supports all PLC and PCS hosts, redundant terminals, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-8R.YO* Compact Fieldbus Power Hub Motherboard for Yokogawa ALF111	Contact Us
	8 segments, redundant, individual modules per segment, Customized for Yokogawa, ALF 111, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

IIoT Applications in Process Industries

Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …

RSS Info Service for PANOS Updates

Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.

FieldConnex®—Fieldbus Made Easy

From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …

Technologies

Fieldbus in the Safe or Any Hazardous Area

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.