WirelessHART adapters enable access to measured values, diagnostic data, and parameterization data of new or already installed 4 mA … 20 mA and HART devices. According to the type of adapter, they can be connected directly to the wiring of every conventional HART device and 4 mA … 20 mA field devices. Installation with a short cable link is also possible. The electrical supply of the WirelessHART adapters is provided either by the loop itself or via a battery. In either scenario, adapters are continuously operating and serve as routers within the WirelessHART network.
The loop-powered adapters come with the patented "StepVoltage" concept, ensuring that voltage drops in the loop caused by the power consumption of the adapter remain very low.
The battery-powered adapters supply themselves and the connected field devices with energy, leading to a maximum of independency. Battery lifetime reaches several years, according to power consumption of the field device, voltage requirements, measurement times, and intervals between measurements.
The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.