Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Ask an Expert
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827
Ask an Expert
Explosion Protection

Isolating Amplifier S1SD-1AI-1U.1

S1SD-1AI-1U.1
  • 1-channel signal conditioner
  • 24 V DC supply
  • Input current and voltage sources
  • Current and voltage output
  • Accuracy 0.1 %
  • Configurable by DIP switches
  • Connection via screw terminals
 Please contact the Serviceline for exact delivery estimation
195.00 USD
Netlist price. Your individual price will be calculated during checkout.
Unit Price 

Quantity

Free Shipping

Purchase on Account

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  S1SD-1AI-1U.1

General specifications
Signal typeAnalog input
Operation timeMTBF: 536 a acc. to SN 29500
stationary continuous operating, average ambient temperature 40 °C (104 °F)
Supply
ConnectionPower Bus or terminals 1-, 2+
Rated voltage16.8 ... 31.2 V DC
Power dissipation0.6 W
Power consumption0.7 W
Input
Connection sidefield side
Transmission rangelinearity range: -1 ... 110 %
Input I
Connectionterminals 5+, 6-
Input signal0/4 ... 20 mA , max. 50 mA
Input resistance≤ 25 Ω
Input II
Connectionterminals 7+, 8-
Input signal0/2 ... 10 V , max. 30 V
Input resistance> 100 kΩ
Output
Connection sidecontrol side
Connectionterminals 3-, 4+
Analog voltage output0/2 ... 10 V , load ≥ 2 kΩ
Analog current output0/4 ... 20 mA, load ≤ 600 Ω
Ripple≤ 10 mV eff
Transfer characteristics
Accuracymax. 0.1 % of full-scale value
Influence of ambient temperature< 100 ppm/K of full-scale value
Frequency range0 ... 10 Hz , 0 ... 100 Hz , 0 ... 5 kHz
Settling time70 ms , 7 ms , 150 µs
Galvanic isolation
Output/power supplysafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuitssafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Control elementsDIP switch
Configurationvia DIP switches
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Conformity
Degree of protectionIEC 60529:2001
Protection against electrical shockEN 61010-1:2010
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Core cross section0.5 ... 2.5 mm2 (20 ... 14 AWG)
Massapprox. 70 g
Dimensions6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
CertificateDEMKO 16 ATEX 1750X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approvalE106378
IECEx approval
IECEx certificateIECEx UL 16.0116X
IECEx markingEx nA IIC T4 Gc
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 11.027210119
ECLASS 10.0.127210119
ECLASS 9.027210119
ECLASS 8.027210119
ECLASS 5.127210119
ETIM 8.0EC001485
ETIM 7.0EC001485
ETIM 6.0EC001485
ETIM 5.0EC001485
UNSPSC 12.132101514

Documents: S1SD-1AI-1U.1

ManualsLanguageFile TypeFile Size
ManualENGPDF2762 KB
HandbuchGERPDF2771 KB
Instruction manuals
Návod k poużitíCZEPDF132 KB
Instruktions manualDANPDF0 KB
Instruction manualENGPDF136 KB
KasutusjuhendESTPDF127 KB
KäyttöohjeFINPDF127 KB
Manuel d'instructionsFRAPDF138 KB
BetriebsanleitungGERPDF137 KB
Οδηγίες χρήσηςGREPDF141 KB
HandleidingHOLPDF0 KB
Instruction manual / BetriebsanleitungHRVPDF130 KB
Manuale di istruzioniITAPDF135 KB
Lietošanas pamācībaLAVPDF131 KB
Instrukciju vadovasLITPDF0 KB
Instrukcja obsługiPOLPDF134 KB
Manual de instruçõesPORPDF132 KB
Manual de utilizareRONPDF0 KB
Návod na poużitieSLKPDF131 KB
Navodila za uporaboSLVPDF130 KB
Manual de instruccionesSPAPDF137 KB
ManualSWEPDF129 KB
Product information
Product Overview SC-SystemENGPDF456 KB
Product Overview SC-SystemGERPDF488 KB
Tender texts
Tender text in GAEB formatENGD816 KB
Tender text in TXT formatENGTXT4 KB
Ausschreibungstext im GAEB-FormatGERD816 KB
Ausschreibungstext im TXT-FormatGERTXT4 KB

Approvals+Certificates: S1SD-1AI-1U.1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0534DPDF468 KB
Certificates
Belarus Pattern ApprovalNr. 11703PDF6929 KB
Canada UL cULE106378 cUL (QUZW7)LINK---
Europe DEMKO ATEX Category 3 GDEMKO 16 ATEX 1750XPDF1876 KB
UL Non-Sparking nA IECEx Certificate of ConformityIECEx UL 16.0116XLINK---
USA ULE106378 UL (QUZW)LINK---

Associated Products: S1SD-1AI-1U.1

Matching System Components
91.00  USD

Contact Us
Interface for Power Bus, Supply current 3 A, LED status indication, Connection via screw terminalspa
52.00  USD

Contact Us
Bus carrier with bus PCB for 35 mm DIN mounting rail, height 7.5 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa
58.00  USD

Contact Us
Bus carrier with bus PCB for 35 mm DIN mounting rail, height 15 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa
  Contact Us
Cover for DIN mounting rail, Suitable for Power Bus, Standard length 250 mm (9.84 inch), simple to customize to application space, Packaging unit: 5 piecespa
42.00  USD

Contact Us
Fixing of the bus carrier with bus PCB in the DIN mounting rail, Termination of DIN mounting rail, Suitable for Power Bus, Packaging unit: 5 pieces left, 5 pieces rightpa

Function: S1SD-1AI-1U.1

This signal conditioner provides the galvanic isolation between field circuits and control circuits.

The device has an input for the following signals:
- 0/4 mA ... 20 mA signal
- 0/2 V ... 10 V signal

The device provides the following standard signals at the output:
- 0/4 mA ... 20 mA signal
- 0/2 V ... 10 V signal

The device is easily configured by the use of DIP switches.

The device can be powered via terminals or Power Bus.

General Notes Relating to Pepperl+Fuchs Product Information
The New SC-System Signal Conditioner Line

Get to know the most compact solution for general-purpose applications!

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

© 2022 All Rights Reserved. Pepperl+Fuchs does not sell personal data.

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.