* Pepperl+Fuchs makes every effort to provide an answer that is helpful and relevant to you. Your question is typically answered in one business day. Occasionally, an answer is delayed. In these cases, we are often researching your question, conferring with colleagues, or may route your question to another Pepperl+Fuchs location. You will be notified via e-mail regarding the status of your question.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Read/Write head for IDENTControl, Europe, Middle East and Africa|
|Operating frequency||865 MHz … 868 MHz: EU, Turkey
865 MHz … 867 MHz: India
866 MHz … 867.6 MHz: Russia
Transmission licenses for other countries on request
|Emitted power||10 ... 2000 mW ERP (ETSI 302208) adjustable|
|Operating distance||typ. 4 m|
|Functional safety related parameters|
|LED green||Power on|
|LED yellow||Read/write operation successful|
|LED blue||Transmission mode|
|Power consumption||≤ 10 W|
|Supply||from the IDENTControl|
|Directive 2014/53/EU||EN 301489-1
|Directive 2011/65/EU (RoHS)||IEC/EN 63000|
|Degree of protection||EN 60529|
|Approvals and certificates|
|Radio approval||EU: DOC-2318
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Storage temperature||-40 ... 85 °C (-40 ... 185 °F)|
|Housing length||268 mm|
|Housing width||270 mm|
|Housing height||81 mm|
|Degree of protection||IP67|
|Connection||connector M12 x 1|
|Mass||approx. 3000 g|
|Manuals||Language||File Type||File Size|
|Manual IUH-F192-V1-*||ENG||3349 KB|
|Handbuch IUH-F192-V1-*||GER||6103 KB|
|Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung||ALL||75 KB|
|Short instructions, safety information|
|Quick Start Guide IUH-F192-V1-*||ENG||1840 KB|
|Kurzanleitung IUH-F192-V1-*||GER||1846 KB|
|CAD||File Type||File Size|
|3-D model / 3-D-Modell||STP||5360 KB|
|CAD Portal / CAD Portal||LINK||---|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-2318B||161 KB|
|India Radio Approval||ETA-103/2016-RLO(SR)/2441||149 KB|
|Russia EAC TP TC 020/2011||CERT-6075||347 KB|
The IUH-F192-V1-FR1 read/write head operates in the UHF frequency range and is optimized for use in industrial applications involving greater distances. The device reads and writes passive tags in line with EPC Generation 2 (ISO/IEC 18000-63). The dense reader mode that has been implemented, which operates in accordance with ETSI EN 302208-1, prevents read/write heads installed in close proximity from interfering with one another.
Wide range of options supported for filtering data. The read/write head is connected to the IDENTControl interface using an M12 connector. The user can monitor the status of the read/write head using the integrated LEDs.
The read/write head has a typical detection range of around 4 meter; this range is determined by the tag used and can be adjusted by selecting the transmission power. Other influencing factors include the setup and installation for the specific application in question, interference from materials present in the area (in particular metal), and the ambient conditions. The read and write distances for the relevant tag, which are detailed separately, have been established in a test laboratory under ideal conditions. For this reason, the combination of read/write head and tag must be tested for the intended application under real conditions.
This product is a wireless device and may be operated only in the country for which a transmission license exists. Information regarding transmission licenses can be found on the datasheet for the product. If a product is released to a customer in a country for which there is no transmission license, the product may be operated only in the country for which a transmission license exists.
If a product does not correspond to the legal requirements in force in the EU but is released to a purchaser within the EU, the product is intended for use solely in the destination country of the end customer outside of the EU for which a transmission license exists. The product may therefore under no circumstances be used directly by the purchaser or released to third parties for the purpose of distribution, application or use on the market within the EU as part of a commercial activity.
In the event of an infringement, the purchaser is obliged to indemnify the supplier against any resulting damages, costs, penalty payments and other expenses.
Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …
Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …