| Product Description |
| Retroreflective sensor with polarization filter |
| General specifications |
| Effective detection range | 0 ... 17 m |
| Threshold detection range | 21 m
|
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Diameter of the light spot | approx. 290 mm at a distance of 17 m |
| Angle of divergence | emitter 1.2°
receiver 2° |
| Functional safety related parameters |
| MTTFd | 1190 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function display | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Controls | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light/Dark switch |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Output |
| Switching type | light/dark on switchable |
| Signal output | 2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007 |
| Mechanical specifications |
| Protection degree | IP67 |
| Connection | connector M12 x 1, 4-pin |
