| Product Description |
| Laser retroreflective sensor for the detection of small parts, small design, polarization filter, 450 mm detection range, laser red light, light/dark ON, push-pull output, test input, M12 plug |
| General specifications |
| Effective detection range | 100 ... 450 mm |
| Threshold detection range | 5.6 m |
| Light source | laser diode |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Laser class | 1 |
| Wave length | 650 nm |
| Target size | > 0.3 mm |
| Diameter of the light spot | approx. 0.5 mm at detection range 150 mm up to 400 mm |
| Angle of divergence | 0.1 ° |
| Functional safety related parameters |
| MTTFd | 930 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function display | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Controls | rotary switch for light/dark, sensitivity adjuster |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Output |
| Switching type | light/dark on switchable |
| Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Mechanical specifications |
| Protection degree | IP67 |
| Connection | Metal connector, M12, 5-pin, 90° rotatable |
