| Product Description |
| Retroreflective sensor with polarization filter for clear object detection |
| General specifications |
| Effective detection range | 0 ... 5.6 m |
| Threshold detection range | 7 m
|
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Diameter of the light spot | approx. 90 mm at a distance of 5.6 m |
| Angle of divergence | Emitter: 1 ° Receiver: 1.2 ° |
| Functional safety related parameters |
| MTTFd | 790 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function display | 2 LEDs yellow for switching state, stability control, TEACH-IN and contrast detection mode |
| Controls | rotary switch for light/dark, 5-step switch for contrast recognition adjustment |
| Electrical specifications |
| Operating voltage | 12 ... 240 V AC/DC |
| Output |
| Switching type | light/dark on switchable |
| Signal output | Relay, 1 alternator |
| Compliance with standards and directives |
| Directive conformity | Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007 |
| Mechanical specifications |
| Protection degree | IP67 |
| Connection | terminal compartment with 8 spring-loaded terminals for wire cross section 0.5 ... 1.5 mm2, insulation stripping 7.5 ... 8.5 mm, M16 x 1.5 cable gland |