| Product Description |
| Robust retroreflective sensor for complex applications, small design, polarization filter, 9 m detection range, red light, light/dark ON, 2 PNP outputs, M12 plug |
| General specifications |
| Effective detection range | 0 ... 6.5 m |
| Threshold detection range | 9 m
|
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Diameter of the light spot | approx. 170 mm at detection range 6.5 m |
| Angle of divergence | 1.5 ° |
| Functional safety related parameters |
| MTTFd | 1000 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function display | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Controls | rotary switch for light/dark, sensitivity adjuster |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Output |
| Switching type | light/dark on switchable |
| Signal output | 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| Mechanical specifications |
| Protection degree | IP67 |
| Connection | 4-pin, M12 metal connector, 90° rotatable |
