Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Slots | ||
---|---|---|
Supply | max. 2 , see section application | |
Isolators | max. 33 , see section application | |
Supply | ||
Connection | isolator power supply via marshalling patchboards or Power Rail | |
Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators | |
Fusing | max. 4 A , in consideration of rated voltage of used isolators | |
Redundancy | redudnancy possible, depends on the used power feed module | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61439-1:2011 (J.9.4.2 b) , EN 61439-2:2011 | |
RoHS | ||
Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Connection | ||
Field side | marshalling patchboards | |
Control side | marshalling patchboards | |
Supply | marshalling patchboards or Power Rail | |
Core cross section | field side: max. 2.5 mm2 control side: max. 2.5 mm2 internal signal wiring: 0.25 mm2 supply: max. 1.5 mm2 |
|
Material | ||
Housing | galvanized steel | |
Surface | galvanized , vibratory finishing | |
Mass | approx. 4 kg , without modules | |
Dimensions | 485 mm x 132 mm x 339 mm (W x H x D) | |
Height | 132 mm | |
Width | 485 mm | |
Depth | 339 mm | |
Mounting | slotted hole 8 x 10 mm | |
Grounding | via front fastening M8 , via lateral fastening on both sides M5 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27219090 |
ECLASS 12.0 | 27219090 |
ECLASS 11.0 | 27219290 |
ECLASS 10.0.1 | 27219290 |
ECLASS 9.0 | 27219290 |
ECLASS 8.0 | 27219290 |
ECLASS 5.1 | 27279201 |
ETIM 9.0 | EC003015 |
ETIM 8.0 | EC003015 |
ETIM 7.0 | EC003015 |
ETIM 6.0 | EC003015 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 32101514 |
The device is a subrack for K-System isolators, which replaces the E-card subrack.
A maximum of 33 isolators can be mounted on the device. The isolator modules are mounted on the DIN mounting rail.
The isolators can be supplied via marshalling patchboards or via the power rail.
Faults can be forwarded to the control via the power rail for evaluation.
The signals are transmitted to the field and control side via marshalling patches.
Datasheet | File Type | File Size |
---|---|---|
Datasheet K-RACK.1.**.*.*.WW.01-Y******* | 875 KB | |
Fiche de données K-RACK.1.**.*.*.WW.01-Y******* | 877 KB | |
Datenblatt K-RACK.1.**.*.*.WW.01-Y******* | 877 KB | |
Datasheet K-RACK.1.**.*.*.WW.01-Y******* | 881 KB | |
Hoja de datos K-RACK.1.**.*.*.WW.01-Y******* | 876 KB |
Instruction manuals | File Type | File Size |
---|---|---|
Инструкции | 139 KB | |
Návod k poużití | 134 KB | |
Instruktions manual | 134 KB | |
Instruction manual | 139 KB | |
Kasutusjuhend | 132 KB | |
Käyttöohje | 129 KB | |
Manuel d'instructions | 135 KB | |
Betriebsanleitung | 140 KB | |
Οδηγίες χρήσης | 141 KB | |
Handleiding | 134 KB | |
Instruction manual / Betriebsanleitung | 133 KB | |
Használati útmutató | 134 KB | |
Manuale di istruzioni | 134 KB | |
Lietošanas pamācība | 134 KB | |
Instrukciju vadovas | 136 KB | |
Instrukcja obsługi | 136 KB | |
Manual de instruções | 135 KB | |
Manual de utilizare | 134 KB | |
Návod na poużitie | 134 KB | |
Navodila za uporabo | 131 KB | |
Manual de instrucciones | 135 KB | |
Manual | 131 KB |
Declaration of Conformity | File Type | File Size |
---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 264 KB |