Inductive sensor NBB2-V3-Z4L-3G-3D
- 2 mm flush
- 2-wire DC sensor with minimum off-state current
- Switching status indicator, yellow LED
- ATEX-/IECEx-approvals for zone 2/22 (Ex ec/tc)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NBB2-V3-Z4L-3G-3D
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | Two-wire with minimum off-state current | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actual operating distance | 1.8 ... 2.2 mm typ. | |
| Reduction factor rAl | 0.25 | |
| Reduction factor rCu | 0.2 | |
| Reduction factor r304 | 0.7 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Operating voltage | 3.7 ... 30 V DC | |
| Switching frequency | 0 ... 700 Hz | |
| Hysteresis | 1 ... 10 typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3.7 V | |
| Operating current | 2 ... 30 mA | |
| Lowest operating current | 2 mA | |
| Off-state current | ≤ 190 µA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 1879 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Gc (ec) | IECEx TUR 21.0019X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0020X | |
| ATEX approval | ||
| Equipment protection level Gc (ec) | TÜV 20 ATEX 8525 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8526 X | |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Cable | ||
| Cable diameter | 3 mm ± 0.2 mm | |
| Bending radius | > 10 x cable diameter | |
| Material | PVC | |
| Core cross section | 0.14 mm2 | |
| Length | 130 mm | |
| Tightening torque, fastening screws | ≤ 0.4 Nm | |
| Dimensions | ||
| Height | 10.2 mm | |
| Width | 27.8 mm | |
| Length | 16 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NBB2-V3-Z4L-3G-3D
Datasheet: NBB2-V3-Z4L-3G-3D
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NBB2-V3-Z4L-3G-3D | 675 KB | |
| Datasheet NBB2-V3-Z4L-3G-3D | 671 KB | |
| Fiche de données NBB2-V3-Z4L-3G-3D | 672 KB | |
| Datenblatt NBB2-V3-Z4L-3G-3D | 672 KB | |
| Scheda tecnica NBB2-V3-Z4L-3G-3D | 671 KB | |
| Datasheet NBB2-V3-Z4L-3G-3D | 677 KB | |
| Folha de dados NBB2-V3-Z4L-3G-3D | 672 KB | |
| Hoja de datos NBB2-V3-Z4L-3G-3D | 672 KB | |
| Datasheet NBB2-V3-Z4L-3G-3D | 684 KB |
Documents: NBB2-V3-Z4L-3G-3D
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 176 KB | |
| Návod k poużití | 169 KB | |
| Instruktions manual | 168 KB | |
| Instruction manual | 168 KB | |
| Kasutusjuhend | 164 KB | |
| Käyttöohje | 163 KB | |
| Manuel d'instructions | 170 KB | |
| Betriebsanleitung | 170 KB | |
| Οδηγίες χρήσης | 180 KB | |
| Handleiding | 167 KB | |
| Instruction manual / Betriebsanleitung | 167 KB | |
| Használati útmutató | 170 KB | |
| Manuale di istruzioni | 168 KB | |
| Lietošanas pamācība | 167 KB | |
| Instrukciju vadovas | 169 KB | |
| Instrukcja obsługi | 170 KB | |
| Manual de instruções | 170 KB | |
| Manual de utilizare | 169 KB | |
| Návod na poużitie | 168 KB | |
| Navodila za uporabo | 167 KB | |
| Manual de instrucciones | 170 KB | |
| Manual | 166 KB |
CAD+CAE: NBB2-V3-Z4L-3G-3D
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 82 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: NBB2-V3-Z4L-3G-3D
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.