| General specifications |
| Switching element function | PNP NO |
| Rated operating distance | 8 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 6.48 mm |
| Actuating element | Nonferrous targets |
| Reduction factor rAl | 1 |
| Reduction factor rCu | 1.1 |
| Reduction factor r304 | 0 |
| Reduction factor r316Ti | 0 |
| Reduction factor rSt37 | 0 |
| Reduction factor rBrass | 0.9 |
| Nominal ratings |
| Operating voltage | 10 ... 30 V DC |
| Switching frequency | 10 Hz |
| Hysteresis | 3 ... 15 typ. 5 % |
| Reverse polarity protection | yes |
| Short-circuit protection | yes |
| Voltage drop | ≤ 2 V |
| Operating current | ≤ 200 mA |
| Current consumption | < 14 mA |
| Off-state current | ≤ 10 µA |
| Indicators/operating means |
| Operating display | 4-way dual LED
Green: power
Yellow: output |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Connection type | V1 connector (M12 x 1), 4-pin |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Housing diameter | 30 mm |
| Protection degree | IP67 / IP68 / IP69K - cordset dependent according to cable specification |
A Level Higher: Inductive Sensors of the 2nd Generation