Welcome to Pepperl-Fuchs International!
Inductive sensor
NCN25-F35-A2-250-15M-V1
Serviceline Information
A Level Higher: Inductive Sensors of the 2nd Generation- Use our VariKont® Finder Tool to easily find your successor ...
- Comfort series
- Extended temperature range of sensor component
0 ... 250 °C (0 ... 482 °F) - 15 m cable between sensor and amplifier with metal case
- Appropriate for conveyor chains
- Minimum bending radius of 30 cm for movable laying
Datasheet as PDF in following languages:
Technical Data: NCN25-F35-A2-250-15M-V1
| General specifications | ||
| Switching element function | PNP |
|
| Rated operating distance | 25 mm | |
| Installation | flush mountable | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 20 mm | |
| Reduction factor rAl | 0.5 | |
| Reduction factor rCu | 0.5 | |
| Reduction factor r304 | 0.6 ... 1 | |
| Mounting angle | Al | |
| Amplifier housing | Stainless steel | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 20 Hz | |
| Hysteresis | 0.3 ... 5 typ. 2 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 ... 200 mA | |
| No-load supply current | ≤ 25 mA | |
| Switching state indication | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 7515 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 250 °C (32 ... 482 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 4-pin | |
| Cable version | PFA cable, with armour of stainless steel | |
| Core cross-section | 3 x 0.34 , screened | |
| Housing material | PTFE / Al / 1.4305 / AISI 303 | |
| Sensing face | PTFE | |
| Protection degree | amplifier IP67 sensor IP40 |
|
| Note | - amplifier 0 °C ... 70 °C - r1.4305 dep. on thickness of measurement plate d: r1.4305 = 1 for d < 1mm Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection. |
|
CAD+CAE: NCN25-F35-A2-250-15M-V1
| CAD | File Type | File Size |
| 3D Modell/3D model | IGS | 226 KB |
| 3D Modell/3D model | STP | 152 KB |
Approvals+Certificates: NCN25-F35-A2-250-15M-V1
| Certificates | Certificate No. | File Type | File Size |
| US CA UL General Purpose | E87056 | LINK | --- |
| Europe Pepperl+Fuchs 2004/108/EC (EMC) Declaration of Conformity | PF 08 CERT 1262 | 357 KB |
Associated Products: NCN25-F35-A2-250-15M-V1
| Accessories | Name |
| V1-W-2M-PUR | Female connector |
| V1-W | Female cordset, field attachable |
| V1-G-2M-PUR | Female connector |