| General specifications |
| Switching element function | NPN NO/NC |
| Rated operating distance | 20 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 16.2 mm |
| Reduction factor rAl | 0.34 |
| Reduction factor rCu | 0.32 |
| Reduction factor r304 | 0.77 |
| Reduction factor rSt37 | 1 |
| Reduction factor rBrass | 0.43 |
| Nominal ratings |
| Operating voltage | 10 ... 60 V DC |
| Switching frequency | 0 ... 200 Hz |
| Hysteresis | typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Operating current | 0 ... 200 mA |
| Off-state current | 0 ... 0.5 mA |
| No-load supply current | ≤ 20 mA |
| Operating voltage display | LED, green |
| Switching state indication | LED, yellow |
| Functional safety related parameters |
| MTTFd | 670 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| e1 Type approval | 2006/28/EG |
| Ambient conditions |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F)
|
| Mechanical specifications |
| Connection type | screw terminals |
| Core cross-section | ≤ 2.5 mm2 |
| Housing material | PA/metal with epoxy powder coating |
| Sensing face | PA-GF35 |
| Protection degree | IP68 / IP69K |
| Mass | 225 g |
| Note | Tightening torque: 1.8 Nm (housing)
Tightening torque: 1.0 Nm (Screw terminal) |
A Level Higher: Inductive Sensors of the 2nd Generation