| General specifications |
| Switching element function | PNP NO |
| Rated operating distance | 3 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 2.43 mm |
| Reduction factor rAl | 0.3 |
| Reduction factor rCu | 0.2 |
| Reduction factor r304 | 0.7 |
| Nominal ratings |
| Operating voltage | 10 ... 30 V DC |
| Switching frequency | 0 ... 360 Hz |
| Hysteresis | 5 ... 15 typ. 10 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Operating current | 0 ... 100 mA |
| Off-state current | 0 ... 10 µA typ. 0.1 µA at 25 °C |
| No-load supply current | ≤ 10 mA |
| Switching state indication | LED, red |
| Standard conformity |
| Standards | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 75 °C (-13 ... 167 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 4-pin |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Housing diameter | 8 mm |
| Protection degree | IP67 |
A Level Higher: Inductive Sensors of the 2nd Generation