| General specifications |
| Switching element function | PNP NC |
| Rated operating distance | 15 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 12.15 mm |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
45 mm x 45 mm x 1 mm |
| Reduction factor rAl | 0.4 |
| Reduction factor rCu | 0.3 |
| Reduction factor r304 | 0.7 |
| Reduction factor rBrass | 0.4 |
| Nominal ratings |
| Installation conditions | |
| A | 15 mm |
| B | 30 mm |
| C | 25 mm |
| F | 80 mm |
| Operating voltage | 10 ... 30 V |
| Switching frequency | 0 ... 300 Hz |
| Hysteresis | 0.04 ... 3.3 mm |
| Reverse polarity protection | yes |
| Short-circuit protection | yes |
| Overload resistance | yes |
| Wire breakage protection | yes |
| Inductive overvoltage protection | yes |
| Ripple | 10 % |
| Voltage drop | ≤ 2.5 V |
| Repeat accuracy | 0.4 mm |
| Operating current | 0 ... 200 mA |
| Off-state current | ≤ 0.01 mA |
| No-load supply current | ≤ 7 mA |
| Switching state indication | Multihole-LED, yellow |
| Functional safety related parameters |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 3-pin |
| Housing material | brass, nickel-plated |
| Sensing face | PBT |
| Housing diameter | 30 mm |
| Protection degree | IP67 |
| Mass | 107 g |
A Level Higher: Inductive Sensors of the 2nd Generation