| Product Description |
| Ultrasonic diffuse sensor with pivoting transducer |
| General specifications |
| Sensing range | 100 ... 2000 mm |
| Adjustment range | 150 ... 2000 mm |
| Unusable area | 0 ... 100 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 200 kHz |
| Response delay | ≤ 100 ms |
| Nominal ratings |
| Temperature drift | ≤ ± 1.5 % of full-scale value |
| Indicators/operating means |
| LED yellow | switching state switch output |
| LED green/yellow | yellow: object in evaluation range
green: Teach-In |
| Potentiometer | switch output adjustable |
| Electrical specifications |
| Operating voltage | 20 ... 30 V DC (including ripple) |
| No-load supply current | ≤ 50 mA |
| Interface |
| Interface type | Infrared |
| Input/Output |
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / TEACH-IN input |
| 0 Level | ≤ 3 V |
| 1 Level | ≥ 15 V |
| Input impedance | typ. 900 Ω |
| Number of sensors | max. 10 |
| Switching output |
| Output type | 1 switch output PNP, NO ( NC contact programmable ) |
| Default setting | 150 ... 2000 mm ( adjustable via potentiometer ) |
| Repeat accuracy | ± 3 mm |
| Operating current | 300 mA , short-circuit/overload protected |
| Switching frequency | ≤ 4 Hz |
| Switching hysteresis | 20 mm ( programmable ) |
| Voltage drop | ≤ 3 V |
| Off-state current | ≤ 10 µA |
| Analog output |
| Output type | 1 current output 4 ... 20 mA , ascending/descending programmable |
| Default setting | rising slope ; evaluation limit A1: 150 mm ; evaluation limit A2: 2000 mm |
| Load resistor | ≤ 500 Ω |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 5-pin |
| Protection degree | IP65 |
| Material | |
| Housing | brass, nickel-plated |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 170 g |
| Construction type | Cylindrical |
