Serviceline Information

New AS-Interface G11 Module with IP68/IP69k Protection

  • AS-Interface certificate
  • Protection degree IP65
  • Flat or round cable connection (via standardized EMS base, not included with delivery)
  • Cable piercing method for flat cable
  • Inputs for 2- and 3-wire sensors
  • Function display for bus, inputs and outputs
  • Direct connection of pneumatic cylinders

Datasheet as PDF in following languages:


Technical Data: VAA-4E2A-G1-ZE/P-S

Product Description
Pneumatic module
4 inputs/2 pneumatic outputs
General specifications
Slave typeStandard slave
Functional safety related parameters
MTTFd44 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED AS-iAS-Interface voltage; LED green
LED INswitching state (input); 4 LED yellow
LED OUTSwitching state (output); 2 LED yellow
Electrical specifications
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Rated operating current≤ 45 mA (without sensors)
≤ 200 mA (complete)
Input
Number/Type2x 2 inputs for 2- or 3-wire sensors (PNP), DC
Supplyfrom AS-Interface
Current loading capacity≤ 100 mA, short-circuit protected
Switching pointOFF: ≤ 1.5 mA
ON: ≥ 5 mA, ≥ 10 V
Output
Number/Type2 pneumatic outputs with separated 3/2-way valves
Pneumatic output
Venting guideSinter filter
Compressed air2 ... 8 bar, filtered (5 µm), oiled or unoiled compressed air
Air throughput550 Nl/min at 6/0 bar
350 Nl/min at 6/5 bar
Nl = Standard litre
Valve cross-section5 mm
Programming instructions
ProfileS-7.F
IO code7
ID codeF
ID1 codeF
ID2 codeF
Data bits (function via AS-Interface) input output
D0 IN1 -
D1 IN2 -
D2 IN3 OUT3
D3 IN4 OUT4
Parameter bits (programmable via AS-i)function
P0not used
P1not used
P2not used
P3not used
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Storage temperature-20 ... 85 °C (-4 ... 185 °F)
Mechanical specifications
Protection degreeIP65 according to EN 60529
Connectioncable piercing methos or terminals
flat cable or standard round cable
inputs: M12 x 1 quick disconnect
outputs: plug-in hose connector (8 mm)
Massapprox. 200 g
MountingDIN rail or screw mounting

Documents: VAA-4E2A-G1-ZE/P-S

Instruction leafletsLanguageFile TypeFile Size
Beipackzettel/Instruction leafletALLPDF491 KB

Approvals+Certificates: VAA-4E2A-G1-ZE/P-S

CertificatesCertificate No.File TypeFile Size
Russia TUV GOST-R101-KC/542PDF90 KB
Europe Pepperl+Fuchs 2004/108/EC (EMC) Declaration of ConformityPF 08 CERT 1262PDF357 KB

Associated Products: VAA-4E2A-G1-ZE/P-S

Matching system componentsName
U-G1FAS-Interface module mounting base
U-G1PAS-Interface module mounting base
U-G1FAAS-Interface module mounting base
AccessoriesName
VBP-HH1-V3.0-KITAS-Interface Handheld with accessory