| General specifications |
| Type | Inclination sensor, 1-axis |
| Measurement range | 0 ... 360 ° |
| Absolute accuracy | ≤ ± 0.5 ° |
| Response delay | ≤ 20 ms |
| Resolution | ≤ 0.1 ° |
| Repeat accuracy | ≤ ± 0.1 ° |
| Temperature influence | ≤ 0.027 °/K |
| Functional safety related parameters |
| MTTFd | 300 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operating display | LED, green |
| TEACH-IN indication | 2 LEDs yellow (switching status), flashing |
| Button | 2 push-buttons ( Switch points programming , Evaluation range programming ) |
| Switching state | 2 yellow LEDs: Switching status (each output) |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| No-load supply current | ≤ 25 mA |
| Time delay before availability | ≤ 200 ms |
| Switching output |
| Output type | 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected |
| Operating current | ≤ 100 mA |
| Voltage drop | ≤ 3 V |
| Analog output |
| Output type | 1 current output 4 ... 20 mA |
| Load resistor | 0 ... 200 Ω at UB = 10 ... 18 V
0 ... 500 Ω at UB = 18 ... 30 V |
| Compliance with standards and directives |
| Standard conformity | |
| Shock and impact resistance | 100 g according to DIN EN 60068-2-27 |
| Standards | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Approvals and certificates |
| CSA approval | cCSAus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| e1 Type approval | 2006/28/EG |
| Ambient conditions |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | M12 x 1 connector, 5-pin |
| Housing material | PA |
| Protection degree | IP68 / IP69K |
| Mass | 240 g |
